Additional Items 2022-23

← All sections of PWD Maharashtra SSR 2022-23

Code	Description	Unit	Rate
54.01	Stamp Concrete of 100mm Thickness - Providing and Laying in-situ M30 Grade unreinforced plain cement stamp concrete of 100mm thickness pavement over a prepared sub base with 43 grade cement, coarse and fine aggregate (natural sand / VSIgrade finely washed crushedsand)Confirming toIS 383,aspermixedinabatching and mixingplant / non tilting mixer and weigh batcher as per approved mix design, admixtures, transporting to site in nagpur city with lead upto 20KM (on Inner Ring Road from Avasti nagar to wadi), spreading, laying with approved make pover, compacted and finished in a continous operation, finishing to lines and grades Also Providing, Placing and applying stamp powder which is light fast UV resistant pigment with appropriate chemical compounds of desired colour on base concrete after excess bleed water has evaporated using dry shake method @5kg per sqm. Including texturing, and covering with plastic sheet (min 200 micron thickness) and also applying two coats of UV-stable,30 % solids clear sealer @ 150 to 250 gms per sqm using surface roller and protecting from falling dust,dirt and curring bycurring compound / byproviding cement vata in cement Mortor 1:8 @ 0.6m x 0.6m center to center, admeasuring 80mm at bottom and 40mm at top with depth of 75mm and maintaining the same throughout curing period by any other method approved by Engineer-incharge or Landscape architect etc. complete. (prior approval of superinteding Engineer will be necessary)	sqm	₹ 1,649
54.02	Slope stabilization, widening of existing structures:-Designing, providing drawings, supply and fixing of fully threaded (only mill or hot thread bars are allowed to avoid any loss of strength), hot-dip galvanized solid geotechnical bars of Required diameter of Soil Nail as per design having yield strength ≥ 670 Mpa, ulimate tensile strength ≥ 800 Mpa and minimum galvanization of 500 grams per sqm required for construction of soil nailed stabilized slope including supply of galvanized nail plates, dome shape nuts, tapper washer, coupler (if required), centralizer and all accessories, including all lead and lifts as per detailed specification and including the cost of installation, drilling and grouting. Confirming to AFNOR NF P 94270, FHWA NHI, FHWA SA, IS 4759 (For Galvanizing) etc complete. As Directed by Engineer in Charge.
54.02a	20mm diameter of Soil Nail	rmt	₹ 3,705
54.02b	25mm diameter of Soil Nail	rmt	₹ 3,855
54.02c	28mm diameter of Soil Nail	rmt	₹ 3,915
54.02d	32mm diameter of Soil Nail	rmt	₹ 4,310
54.02e	35mm diameter of Soil Nail	rmt	₹ 4,815
54.03	Reinforced Earth Wall:- Supplying and laying of 50mm to 90mm wide high tensile polymeric GeoStrap consisting of discrete channels of closely packed high tenacity polyester tendons encased in a Linear Low-Density Polyethylene sheath (LLDPE) and having minimum 25KN up to 100KN and a maximum 12 pecent elongation at break. Confirming to IRC SP 102 and MoRTH 3100 etc complete. As Directed by Engineer in Charge.	rmt	₹ 112
54.04	Reinforced Soil Abutments:- Supplying and laying of high adherence and high adherence reinforced galvanized steel strips with transverse ribs, having minimum tensile strength of 490N/mm2 and yield strength of 355N/mm2 and minimum galvanization of 1000 grams per sqm as per BSEN 10025 Grade 355JR, as per BBA certified system for construction of Reinforced Earth walls and Pure Abutments and Confirming to IS 4759 (For Galvanisation), IRC SP 102(ForDesign),BSEN10025(ForGradeofSteel)etc complete. As Directed by Engineer in Charge.	rmt	₹ 281
54.05	Providing and fixing kerbstone with led lighting system as per following specifications: dimensions with vertical mounting legs with 10mm horizontal square shape mild steel reinforcements. Illuminated kerb stone having visible dimensions:-500mm x 150mm x 150mm.(as per irc - 86-1983) 80mm legs having ms reinforcements shal be embedded in bt/concrete road surface.the kerb stone should have kerb angle of 45 degree, with rubber plugs at both ends of the kerbstones (2 nos)having load carrying capacity - vertical: 1465kg, horizontal: 2349 (certified bygovt.Recoganized bodies)having thermal stability-: -40 to +120 degree celcius (certified by govt. Recoganized bodies. Illuminated kerb stones including: ingrace protection and connector rating ip67, electrical wire -(as per is: 694), led strip (as per lm:80) standard. Including for electrical fixing -frp junction box consisting of-10amp.Switch modulepowersupply(smps)having input voltage -230vac, output voltage 36v dc, 2 pole mcb. Illuminated kerb stones having warranty for 3 years. illuminated kerbstone shall be fixed into cast-in-situ cement concrete of m20 grade at base, back filling and grooves, including dismantling, fixing, removal of dismantled material and cleaning etc. Complete. The colour of kerb stone shall be provided as directed by engineer in charge.	rmt	₹ 7,411
54.06	Provinding and errecting 1.80m high Fix knot fencing Bezinal 2000 Type fencing having 16 Rows of 2.40 mm Bezinal 2000 wire on M.S. angle 50x50x5 mm embedded in c c block of 1:4:8 of size 450x450x910 mm at end and block of 450x450x760 mm at intermediate, 4.80m specing of pole with "S" clip high Tensile Bezinal 2000 including pulling high tensile wire with 5 Tone capacity puller including finishing and scoat of oil painting to M.S. angle etc. complete.	rmt	₹ 757
54.07	Provinding and errecting 1.20m high Fix knot fencing Bezinal 2000 Type fencing having 11 Rows of 2.40 mm Bezinal 2000 wire on M.S. angle 50x50x5 mm embedded in c c block of 1:4:8 of size 450x450x910 mm at end and block of 450x450x760 mm at intermediate, 4.80m specing of pole with "S" clip high Tensile Bezinal 2000 including pulling high tensile wire with 5 Tone capacity puller including finishing and scoat of oil painting to M.S. angle etc. complete	rmt	₹ 7,411
54.08	Providing and fixing of factory made uPVC Sliding window & door (White Colour) complete, comprising uPVC multi-chambered frame having in-built uPVC roller track on top and uPVC sash with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS: 476 - Part 7 Classification 1 8 Ignitability Evaluation BS: 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa All corners of frame and sash will be fusion welded. After placing 5 mm Float Annealed glass in the sash, uPVC glazing bead, interlock, EPDM / TPE gasket, brush shall be provided including touch lock and rollers & proper drainage system shall be provided. Window / Door will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use.
54.08a	2 Track 2 / 4 Sash (Big Series) window frame of size 67 x 54 mm & Sash of size 64 x 47 mm	sqm	₹ 7,320
54.08b	3 Track 3 / 6 Sash (Big Series) window frame of size 122 x 54 mm & Sash of size 64 x 47 mm	sqm	₹ 8,526
54.08c	3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of window) (Big Series) Window frame of size 122 x 54 mm & Sash of size 64 x 47 mm.	sqm	₹ 9,760
54.08d	2 Track 2 / 4 Sash (Big Series) door frame of size 67 x 54 mm & Sash of size 85 x 47 mm.	sqm	₹ 6,558
54.08e	3 Track 3 / 6 Sash (Big Series) door frame of size 122 x 54 mm & Sash of size 85 x 47 mm. (cid:10)	sqm	₹ 6,267
54.08f	3 Track with Mesh-2 Glass Sash + 1 Mesh Sash (Each sash shall be half of width of door) (Big Series) Door frame of size 122 x 54 mm & Door Sash ofsize 85 x 47mm & Mesh sash of size 85 x 47 mm. (cid:10)	sqm	₹ 8,273
54.09	Providing and fixing of factory made uPVC casement window / Fixed Window & Casement Door (White Colour) comprising uPVC multi-chambered frame, Sash, & Mullion with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with G.I. section 1.5 mm, wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS: 476 - Part 7 Classification 1 8 Ignitability Evaluation BS: 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-uniform discoloration, wrapping and rotting under general use.
54.09a	Casement Window (Big Series) frame of size 67 x 62 mm & Sash / Mullion of size 67 x 78 mm.	sqm	₹ 10,495
54.09b	Casement Door (Big Series) frame of size 67 x 62 mm & Door Sash of size 67 x 115 mm & Mullion (if required) of size 67 x 78 mm. (cid:10)	sqm	₹ 9,581
54.09c	Fixed Window (Big Series) frame of size 67 x 62 mm & Mullion (if required)of size67 x 78 mm.	sqm	₹ 8,342
54.10	Providing and fixing factorymade uPVC twin sash casement glazed window and door (White Colour) comprising of two shutters, one outward opening having glass and one inward opening having SS Mesh and integrated grill provision between two shutters. uPVC multi-chambered frame, sash, bugmesh sash and mullion (where ever required) extruded profiles with wall thickness of 2.3mm (+-0.2 mm) duly reinforced with G.I section 1.50 wherever required. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specified Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS: 476 - Part 7 Classification 1 8 Ignitability Evaluation BS: 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame and sash will be fusion welded. Mullion shall be welded / screwed. EPDM / TPE Gasket shall be provided in all frame, sash & mullion, wherever necessary.Thereafter, 5 mm Float Annealed glass shall be provided in the sash with the help of uPVC glazing bead and hardware, i.e., friction hinge & single point handle (in window) & 3D Hinges & Multipoint Lock (in door) shall be provided. Window / Door shall be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non-
54.10a	uniform Twin Sash discoloration, Casement Window wrapping frame and rotting of size under 122 x general 62 mm, use. sash 67 x 78 mm & bug-mesh sash of 42 x 84 mm.	sqm	₹ 18,783
54.10b	Twin Sash Casement Door frame of size 122 x 62 mm, door sash 67 x 115 mm & bug- mesh sash of 42 x 84 mm.	sqm	₹ 13,744
54.11	Providing and fixing of factorymade uPVC Louver window (White Colour) comprising of uPVC multi-chambered with wall thickness of 2.3mm (+-0.2 mm), duly reinforced with 1.5 mm thick G. I. Section. uPVC window & door profile shall be made in India & shall conform to BS EN 12608 and other standards as mentioned below: S.No. Name of the test Test Method Specifie Parameter 1 Tensile Impact Strength ISO 8256 - more than 700Kj/m2 2 Vicat Softening Temperature EN ISO – 306 Shall not be < 750C 3 Charpy Impact Strength EN ISO – 179-2 Shall not be < 20KJ/m2 4 Flexural Modulus Elasticity EN ISO – 178 Shall not be < 2200 N/mm2 5 Mean Breaking Stress for welded corner (a) For the tensile bending test EN – 514 Shall not be < 25 N/mm2 (b) For the compression bending test Shall not be < 30N/mm2 6 Heat Reversion Test IS:4985-2000 Shall not be > 2.0 % 7 Surface Spread of flame BS: 476 - Part 7 Classification 1 8 Ignitability Evaluation BS: 476 - Part 5 'P' Not easily ignitable 9 Tensile modulus ASTM D 638 Shall not be < 35 MPa 10 Shear Modulus ASTM D 732 Shall not be < 220 MPa 11 Tensile Strength EN ISO 527 Shall not be < 30 MPa. All corners of frame shall be fusion welded. Both vertical sides of the frame, adjustable louver mechanism having one lever or fixed louver bracket shall be fitted with the of 4 mm Frosted Annealed glass. Window will be fixed to the wall with 100mm long and 8mm dia. Fasteners and complete in all respect as per direction of Engineer-In-Charge. uPVC Window and Door Profiles are warranted for a period of ten (10) years against non- uniform discoloration,wrapping and rotting under general use. a.Louver Window (Big Series) frame of size 67 x 62 mm & Mullion (if required) of size 67 x 78 mm.	sqm	₹ 9,232
54.12	Providing and Fixing factory made PVC door frame made of PVC extruded sections of size77 mmx58mm,havingwallthickness 2.0mm(±0.2mm).Both verticalssides of the framereinforced withPVC profileofcross section size29mmx31mmx 2mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer's specification and direction of engineerin-charge.	sqm	₹ 555
54.13	Providing and fixing 37 mm thick factorymade PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x37mmwithwallthickness 2mm(±0.2mm)with inbuilt beading onone side,the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 29 mm x 31 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer's specification and direction of engineer-in-charge.	sqm	₹ 3,801
54.15	Finishing upto 225 mm thick cement concrete laid to proper level and slope including compacting finishing with tremix treatment for paving slab with compaction by screed vibrator, removing excess water from the cement concrete by tremix vaccum dewatering system, finishing the surface with floater and trowel including all etc. complete as directed	sqm	₹ 126
54.16	Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Section, cross bracing in Angle section of size 35mm x 35mmx 5mm(wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 10 ft height X ( 4ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 15,222
54.17	Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Section, cross bracing in Angle section of size 35mm x 35mmx 5mm(wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750 mm etc (Complete of final size of visible area 10 ft height X ( 3ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 14,152
54.18	Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Section, cross bracing in Angle section of size 35mm x 35mmx 5mm(wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete.Of final size of visible area 10 ft height X ( 5ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 16,103
54.19	Procurement, Supply, Fabrication, Erection, Installation of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick 'C' Channel Section, cross bracing in Angle section of size 35mm x 35mmx 5mm(wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 08 ft height X ( 4ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 13,972
54.20	Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city limits) of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 08 ft height X ( 3ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 12,903
54.21	Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city limits) of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 08 ft Vertical X( 5ft horizontal X 4ft vertical) EPS panel	nos	₹ 14,854
54.22	Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city limits) of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 06 ft Vertical X (4ft Horizonal X 4 Vertical)	nos	₹ 12,746
54.23	Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city limits) of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 06 ft height X ( 3ft horizontal X 4ft Vertical EPS Panel)	nos	₹ 11,677
54.24	Procurement, Supply, Fabrication, Erection, Installation (upto 20kms lead within city limits) of required height Sign Board to have a clear and legible visibility, made with 100mm x 50mmx 5mm thick Channel Section, cross bracing in Angle section of size 35mm x 35mm x 5mm (wherever required) and EPS panels of thickness 75mm. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (Complete of final size of visible area 08 ft Vertical X( 5ft horizontal X 4ft vertical) EPS panel	nos	₹ 13,628
54.25	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and EPS panel of thickness 75mm having size 4 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc	nos	₹ 11,731
54.26	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and EPS panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc	nos	₹ 10,891
54.27	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and EPS panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc	nos	₹ 12,572
54.28	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 10ft height and EPS panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc	nos	₹ 10,892
54.29	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 8ft height and EPS panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (cid:10)	nos	₹ 10,052
54.30	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 8ft height and EPS panel of thickness 75mm having size5 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (cid:10)	nos	₹ 11,732
54.31	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS panel of thickness 75mm having size 4 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (cid:10)	nos	₹ 10,052
54.32	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS panel of thickness 75mm having size 3 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (cid:10)	nos	₹ 9,212
54.33	Procurement, Supply, Installation of required height Sign Board to have a clear and legible visibility, made with 150mm x 150mm size RCC Pole of M30 grade - 6ft height and EPS panel of thickness 75mm having size 5 ft Horizontal X 4 ft. vertical. The base will be grouted with a M20 grade Plain Cement concrete foundation of size 600mm x 600mm x 750mm etc (cid:10)	nos	₹ 10,892

Source: State Schedule of Rates 2022-23, Public Works Department, Government of Maharashtra — completed rates excluding GST. Rates are shown as published; check the official book and its correction slips before you submit an estimate. BESTimate is not issued by or affiliated with this department.

Made free with BESTimate by F K Consultant · estimate.fkconsultant.com/calculators · approximate figures — check against your drawings and local rates.