← All sections of CPWD DSR 2023
| Code | Description | Unit | Rate |
|---|---|---|---|
| 9.1 | Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | ||
| 9.1.1 | Second class teak wood | cum | ₹ 142,949.7 |
| 9.1.2 | Sal wood | cum | ₹ 116,520.3 |
| 9.1.3 | Kiln seasoned and chemically treated hollock wood | cum | ₹ 83,378.05 |
| 9.2 | Providing laminated veneer lumber conforming to IS:14616 and TAD -15: 2001 (Part B) in factory made frames of doors, windows, clerestory windows and other frames, wrought framed and fixing in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). | cum | ₹ 131,981.1 |
| 9.3 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc. | ||
| 9.3.1 | Sal wood | cum | ₹ 104,754.35 |
| 9.3.2 | Kiln seasoned and chemically treated hollock wood | cum | ₹ 71,337.85 |
| 9.4 | Extra for additional labour for circular works, such as in frames of fan light | ||
| 9.4.1 | Second class teak wood | cum | ₹ 14,294.95 |
| 9.4.2 | Sal wood | cum | ₹ 11,652.05 |
| 9.4.3 | Kiln seasoned and chemically treated hollock wood | cum | ₹ 8,338.1 |
| 9.5.1 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Second class teak wood | ||
| 9.5.1.1 | 35 mm thick shutters | sqm | ₹ 4,111.95 |
| 9.5.1.2 | 30 mm thick shutters | sqm | ₹ 3,747.3 |
| 9.5.2 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Kiln seasoned and chemically treated hollock wood | ||
| 9.5.2.1 | 35 mm thick shutters | sqm | ₹ 2,869.1 |
| 9.5.2.2 | 30 mm thick shutters | sqm | ₹ 2,676.85 |
| 9.5.3 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. (Note: Butt hinges and necessary screws shall be paid separately) — Kiln seasoned selected planks of sheesham wood | ||
| 9.5.3.1 | 35 mm thick shutters | sqm | ₹ 3,638.35 |
| 9.5.3.2 | 30 mm thick shutters | sqm | ₹ 3,338.65 |
| 9.6 | Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS: 14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer- in-charge and panelling with panels of: (Note:- Butt hinges and necessary screws shall be paid separately) | ||
| 9.6.1 | 12 mm thick plain grade -1, medium density flat pressed three layer particle board FPT - I or graded wood particle board FPT- I, IS: 3087 marked, bonded with BWP type synthetic resin adhesive as per IS: 848: | sqm | ₹ 3,069.05 |
| 9.6.2 | 12 mm thick pre-laminated particle board (decorative lamination on both sides) grade -1, medium density flat pressed, three layer particle board FPT- I or graded wood particle board FPT- I, conforming to IS: 3087, bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade 1, Type - II marked. | sqm | ₹ 3,212.7 |
| 9.6.3 | 12 mm thick one side Pre-laminated particle board (decorative lamination on one side and other sides balancing lamination) grade -1, medium density flat pressed, three layer particle board FPT - I or graded wood particle board FPT-1 conforming to IS: 3087 bonded with BWP type synthetic resin adhesive as per IS: 848 and pre-laminated conforming to IS: 12823, Grade -1, Type II marked. | sqm | ₹ 3,450.3 |
| 9.7 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. | ||
| 9.7.1 | Second class teak wood | sqm | ₹ 3,323.2 |
| 9.7.2 | Kiln seasoned and chemically treated hollock wood | sqm | ₹ 2,327.1 |
| 9.7.3 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Ply wood 5 ply, 9 mm thick | ||
| 9.7.3.1 | Decorative plywood both side decorative veneer (Type - I) conforming to IS 1328 BWR type | sqm | ₹ 2,724.25 |
| 9.7.3.2 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | sqm | ₹ 2,698.4 |
| 9.7.4 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Ply wood 7 ply, 9 mm thick | ||
| 9.7.4.1 | Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type | sqm | ₹ 2,907.05 |
| 9.7.5 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Particle Board 12 mm thick | ||
| 9.7.5.1 | Plain particle board flat pressed, 3 layer or graded wood particle board medium density Grade I, IS: 3087 marked | sqm | ₹ 1,693 |
| 9.7.5.2 | Veneered flat pressed three layer or graded wood particle board with commercial veneering on both sides conforming to IS:3097, grade I | sqm | ₹ 2,012.05 |
| 9.7.5.3 | Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side, Grade I, Type II IS: 12823 marked | sqm | ₹ 2,081.05 |
| 9.7.5.4 | Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked | sqm | ₹ 2,053.45 |
| 9.7.6 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Coir Veneer Board (conforming to IS 14842) | ||
| 9.7.6.1 | 12 mm thick | sqm | ₹ 2,253.45 |
| 9.7.7 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. — Float glass panes | ||
| 9.7.7.1 | 4 mm thick glass pane (weight not less than 10 kg/sqm). | sqm | ₹ 2,241.8 |
| 9.7.7.2 | 5.0 mm thick glass panes (weight not less than 12.50 kg/sqm). | sqm | ₹ 2,600.45 |
| 9.7 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. | ||
| 9.7.8 | Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire and 1.4 mm wide aperture with matching wood beading | sqm | ₹ 1,800.45 |
| 9.9.1 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Second class teak wood | ||
| 9.9.1.1 | 35 mm thick | sqm | ₹ 4,940.2 |
| 9.9.1.2 | 30 mm thick | sqm | ₹ 4,523.4 |
| 9.9.2 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Kiln seasoned and chemically treated hollock wood | ||
| 9.9.2.1 | 35 mm thick | sqm | ₹ 3,524.85 |
| 9.9.2.2 | 30 mm thick | sqm | ₹ 3,305.2 |
| 9.9.3 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. — Kiln seasoned selected planks of sheesham wood | ||
| 9.9.3.1 | 35 mm thick | sqm | ₹ 4,401.55 |
| 9.9.3.2 | 30 mm thick | sqm | ₹ 4,059.05 |
| 9.10 | Providing and fixing factory made laminated veneer lumber glazed shutter conforming to IS: 14616 and TADS 15:2001 (Part B), using 4 mm thick float glass panes for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, all as per directions of Engineer-in-charge (Note:- Butt hinges and necessary screws shall be paid separately) | ||
| 9.10.1 | 30 mm thick shutters | sqm | ₹ 3,066.2 |
| 9.11 | Extra for providing heavy sheet float glass panes instead of ordinary float glass in glazed doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured) | ||
| 9.11.1 | 5.0 mm thick (weight not less than 12.50 kg per sqm) instead of 4 mm thick (weight not less than 10 kg per sqm). | sqm | ₹ 295.9 |
| 9.12 | Extra for providing frosted glass panes 4 mm thick (weight not less than 10 kg per sqm) instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory window shutters. (Area of opening for glass panes excluding portion inside rebate shall be measured). | sqm | ₹ 176.4 |
| 9.13 | Deduct for providing pin headed glass panes instead of ordinary float glass panes 4 mm thick (weight not less than 10 kg per sqm) in doors, windows and clerestory windows shutters (Area of opening for glass panes excluding portion inside rebate shall be measured). | sqm | ₹ 73.95 |
| 9.14 | Extra for providing ISI marked Stainless Steel butt hinges instead of M.S. pressed butt hinges bright finished of required size with necessary screws. (Shutter area to be measured). | sqm | ₹ 193.55 |
| 9.15.1 | Deduct for not providing hinges in doors, windows or clerestory window shutters with: — ISI marked Stainless steel butt hinges with stainless steel screws: | ||
| 9.15.1.1 | For 2nd class teak wood and other class of wood shutters | sqm | ₹ 253.3 |
| 9.15.2 | Deduct for not providing hinges in doors, windows or clerestory window shutters with: — ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. | ||
| 9.15.2.1 | For 2nd class teak wood and other class of wood shutters | sqm | ₹ 59.8 |
| 9.16.1 | Providing and fixing 25 mm thick shutters for cup board etc.: — Providing and fixing 25 mm thick shutters for cup board etc.: — Panelled or panelled & glazed shutters: | ||
| 9.16.1.1 | Second class teak wood including ISI marked anodised aluminium butt hinges with necessary screws | sqm | ₹ 4,402.85 |
| 9.16.1.2 | Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws | sqm | ₹ 4,542.9 |
| 9.16.2 | Providing and fixing 25 mm thick shutters for cup board etc.: — Providing and fixing 25 mm thick shutters for cup board etc.: — Glazed shutters: | ||
| 9.16.2.1 | Second class teak wood including ISI marked anodized aluminium butt hinges with necessary screws | sqm | ₹ 4,193.25 |
| 9.16.2.2 | Second class teak wood including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws | sqm | ₹ 4,241.15 |
| 9.17 | Providing and fixing flat pressed three layer particle or graded plain wood board medium density exterior grade (Grade I) FPT-I, conforming and marked to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately): | ||
| 9.17.1 | 12 mm thick | sqm | ₹ 802.95 |
| 9.17.2 | 18 mm thick | sqm | ₹ 1,020.95 |
| 9.18 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS: 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS: 12823 marked, in shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately). | ||
| 9.18.1 | 18 mm thick | sqm | ₹ 1,245.75 |
| 9.18.2 | 25 mm thick | sqm | ₹ 1,715.2 |
| 9.20 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. | ||
| 9.20.1 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | sqm | ₹ 3,473.85 |
| 9.20.2 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | sqm | ₹ 3,167.95 |
| 9.20.3 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. Piano hinges IS: 3818 marked with necessary screws | sqm | ₹ 2,819.25 |
| 9.21 | Providing and fixing ISI marked flush door shutters conforming to IS: 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: | ||
| 9.21.1 | 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | sqm | ₹ 2,392.65 |
| 9.21.2 | 30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws | sqm | ₹ 2,172.1 |
| 9.21.3 | 25 mm thick (for cupboard) including ISI marked nickel plated bright finished M.S. piano hinges with necessary screws | sqm | ₹ 2,093.7 |
| 9.22 | Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I) | ||
| 9.22.1 | On one side only | sqm | ₹ 478 |
| 9.23 | Extra for providing lipping with 2nd class teak wood battens 25 mm minimum depth on all edges of flush door shutters (over all area of door shutter to be measured). | sqm | ₹ 462.35 |
| 9.24 | Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): | ||
| 9.24.1 | Rectangular or square | sqm | ₹ 199.15 |
| 9.24.2 | Circular | sqm | ₹ 206.3 |
| 9.25 | Extra if louvers (not exceeding 0.2 sqm) are provided in flush door shutters (overall area of door shutters to be measured). | ||
| 9.25.1 | Decorative type door | sqm | ₹ 405.45 |
| 9.26 | Extra for cutting rebate in flush door shutters (Total area of the shutter to be measured). | sqm | ₹ 106.7 |
| 9.27.1 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: — Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: — 35 mm thick shutters | ||
| 9.27.1.1 | with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.1.1.1 Second class teak wood 9.27.1.1.2 Kiln seasoned and chemically treated hollock wood 9.27.1.1.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 4,852.3 |
| 9.27.1.2 | With ISI marked stainless steel butt hinges of required size 9.27.1.2.1 Second class teak wood 9.27.1.2.2 Kiln seasoned and chemically treated hollock wood 9.27.1.2.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 5,045.85 |
| 9.27.2 | Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: — Providing and fixing wire gauge shutters using galvanized M.S. wire gauge of average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm, for doors, windows and clerestory windows with hinges and necessary screws: — 30 mm thick shutters | ||
| 9.27.2.1 | with ISI marked M.S. pressed butt hinges bright finished of required size 9.27.2.1.1 Second class teak wood 9.27.2.1.2 Kiln seasoned and chemically treated hollock wood 9.27.2.1.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 4,326.8 |
| 9.27.2.2 | With ISI marked stainless steel butt hinges of required size 9.27.2.2.1 Second class teak wood 9.27.2.2.2 Kiln seasoned and chemically treated hollock wood 9.27.2.2.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 4,520.3 |
| 9.31 | Providing and fixing wire gauge laminated veneer lumber shutters conforming to IS: 14616, and as per TADS 15:2001 (Part B) using galvanised wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm as per IS:1568, for doors, windows and clerestory windows, fixing with butt hinges of required size with necessary screws, as per directions of Engineer-in-charge: (Note:- Butt hinges and necessary screws shall be paid separately) | ||
| 9.31.1 | 35 mm thick shutters | sqm | ₹ 3,066.2 |
| 9.31.2 | 30 mm thick shutters | sqm | ₹ 2,803 |
| 9.40.1 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: — Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: — 2nd class teak wood | ||
| 9.40.1.1 | 50x12 mm | rmt | ₹ 221.1 |
| 9.40.1.2 | 50 x 20 mm | rmt | ₹ 271.75 |
| 9.40.2 | Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: — Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete: — Kiln seasoned and chemically treated hollock wood | ||
| 9.40.2.1 | 50x12 mm | rmt | ₹ 185.95 |
| 9.40.2.2 | 50x20 mm | rmt | ₹ 213.2 |
| 9.41 | Providing and fixing plain jaffri of 35x10 mm laths placed 35 mm apart (frames to be paid separately), including fixing 50x12 mm beading complete with: | ||
| 9.41.1 | Second class teak wood | sqm | ₹ 2,945.1 |
| 9.42 | Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed three layer or graded plain wood particle board medium density grade I, ISI marked and conforming to IS: 3087 marked, including top cover of 6 mm commercial ply wood conforming to IS: 303 BWR grade, nickel plated M.S. pipe 20 mm dia ( heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | rmt | ₹ 600.55 |
| 9.43 | Providing and fixing 18 mm thick, 150 mm wide pelmet of coir veneer board ISI marked IS: 14842, including top cover of 6 mm coir veneer board, nickle plated M.S. Pipe 20 mm dia. (heavy type) curtain rod with nickel plated brackets, including fixing with 25x3 mm M.S. Flat 10 cm long fixed to pelmet with hollock wood cleats of size 100 mm x 40 mm x 40 mm on both inner side of pelmet and rawl plugs 75 mm long etc. all complete. | rmt | ₹ 725.85 |
| 9.44 | Extra for using veneered particle board conforming to IS 3097 Grade I, in item of pelmet 18 mm thick 150 mm wide. | ||
| 9.44.1 | Non decorative veneer on both sides | rmt | ₹ 38.7 |
| 9.44.2 | Particle board with decorative veneering on both sides | rmt | ₹ 125.2 |
| 9.45 | Providing and fixing teak wood lipping of size 25x3 mm in pelmet. | rmt | ₹ 73.7 |
| 9.46 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25 mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete: | ||
| 9.46.1 | 12 mm dia | rmt | ₹ 285.1 |
| 9.46.2 | 20 mm dia | rmt | ₹ 393.25 |
| 9.46.3 | 25 mm dia | rmt | ₹ 525.55 |
| 9.47 | Providing and fixing nickel plated M.S. pipe curtain rods with nickel plated brackets: | ||
| 9.47.1 | 20 mm dia (heavy type) | rmt | ₹ 175 |
| 9.47.2 | 25 mm dia (heavy type) | rmt | ₹ 186.4 |
| 9.48 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. | ||
| 9.48.1 | Fixed to steel windows by welding | kg | ₹ 219.1 |
| 9.48.2 | Fixed to openings /wooden frames with rawl plugs screws etc. | kg | ₹ 238.35 |
| 9.49 | Providing and fixing expanded metal 20x60 mm strands 3.25 mm wide and 1.6 mm thick for windows etc. including 62 x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. | sqm | ₹ 1,421.95 |
| 9.50 | Providing and fixing hard drawn steel wire fabric 75x25 mm mesh of weight not less than 7.75 Kg per sqm to window frames etc. including 62x19 mm beading of second class teak wood and priming coat with approved steel primer all complete. | sqm | ₹ 1,641.15 |
| 9.51 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. | ||
| 9.51.1 | With second class teak wood beading 62X19 mm | sqm | ₹ 1,308.35 |
| 9.51.2 | With 12 mm mild steel U beading | sqm | ₹ 939.2 |
| 9.52 | Deduct for fixing 75x25 mm hard drawn steel wire fabric of weight not less than 7.75 Kg per sqm in panelled and glazed door and window shutter instead of glass sheet 4 mm thick (weight not less than 10 kg per sqm) | sqm | ₹ 155.1 |
| 9.53 | Providing 40x5 mm flat iron hold fast 400 mm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 300x100x150 mm 1:3:6 mix (1 cement: 3 coarse sand: 6 graded stone aggregate 20 mm nominal size). | nos | ₹ 228.85 |
| 9.54 | Providing beams including hoisting, fixing in position and applying wood preservative for the unexposed surfaces, etc. complete with: | ||
| 9.54.1 | Sal wood | cum | ₹ 103,140.1 |
| 9.54.2 | Hollock wood BRIGHT FINISHED M.S. | cum | ₹ 69,178.05 |
| 9.55 | Providing and fixing ISI marked IS:1341 M.S. pressed butt hinges bright finished with necessary screws etc. complete: | ||
| 9.55.1 | 125x65x2.12 mm | nos | ₹ 53 |
| 9.55.2 | 100x58x1.90 mm | nos | ₹ 45 |
| 9.55.3 | 75x47x1.70 mm | nos | ₹ 39.3 |
| 9.55.4 | 50x37x1.50 mm | nos | ₹ 18.85 |
| 9.56 | Providing and fixing ISI marked, IS: 1341, M.S. heavy weight bright finished butt hinges with necessary screws etc. complete: | ||
| 9.56.1 | 125x90x4.00 mm | nos | ₹ 71.25 |
| 9.56.2 | 100x75x3.50 mm | nos | ₹ 62.05 |
| 9.56.3 | 75x60x3.10 mm | nos | ₹ 48.15 |
| 9.56.4 | 50x40x2.50 mm Note: - In coastal areas, M.S. heavy weight butt hinges or stainless steel hinges shall be used. COPER OXIDISED MILD STEEL FITTINGS (COPPER OXIDISED AS PER IS: 1378) | nos | ₹ 27.5 |
| 9.57 | Providing and fixing ISI marked IS:1341 oxidised M.S. pressed butt hinges with necessary screws etc. complete. (Copper oxidised as per IS 1378) | ||
| 9.57.1 | 125x65x2.12 mm | nos | ₹ 55.75 |
| 9.57.2 | 100x58x1.90 mm | nos | ₹ 48.2 |
| 9.57.3 | 75x47x1.70 mm | nos | ₹ 40.5 |
| 9.57.4 | 50x37x1.50 mm | nos | ₹ 20 |
| 9.58 | Providing and fixing ISI marked IS: 1341 oxidised M.S. pressed Parliamentary hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.58.1 | 150x125x27x2.80 mm | nos | ₹ 91.7 |
| 9.58.2 | 125x125x27x2.80 mm | nos | ₹ 86 |
| 9.58.3 | 100x125x27x2.80 mm | nos | ₹ 75.35 |
| 9.58.4 | 75x100x20x2.24 mm | nos | ₹ 66.65 |
| 9.59 | Providing and fixing ISI marked oxidised M.S. single acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.59.1 | 150 mm | nos | ₹ 291.35 |
| 9.59.2 | 125 mm | nos | ₹ 262.9 |
| 9.59.3 | 100 mm | nos | ₹ 232.7 |
| 9.60 | Providing and fixing ISI marked IS: 453 oxidised M.S. double acting spring hinges with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.60.1 | 150 mm | nos | ₹ 326.9 |
| 9.60.2 | 125 mm | nos | ₹ 291.35 |
| 9.60.3 | 100 mm | nos | ₹ 261.15 |
| 9.61 | Providing M.S. Piano hinges ISI marked IS: 3818 finished with nickel chromium plating grade 1 as per IS: 1068 and fixing with necessary screws etc., complete. | ||
| 9.61.1 | Overall width 35 mm | rmt | ₹ 336.45 |
| 9.61.2 | Overall width 50 mm | rmt | ₹ 337.9 |
| 9.61.3 | Overall width 65 mm | rmt | ₹ 357.8 |
| 9.62 | Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.62.1 | 300x16 mm | nos | ₹ 216.55 |
| 9.62.2 | 250x16 mm | nos | ₹ 193.7 |
| 9.63 | Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.63.1 | 250x10 mm | nos | ₹ 83.9 |
| 9.63.2 | 200x10 mm | nos | ₹ 69.4 |
| 9.63.3 | 150x10 mm | nos | ₹ 59.45 |
| 9.63.4 | 100x10 mm | nos | ₹ 44.3 |
| 9.64 | Providing and fixing ISI marked 85x42 mm oxidised M.S. pull bolt lock conforming to IS: 7534 with necessary screws bolts, nut and washers etc. complete (Copper oxidised as per IS 1378). | nos | ₹ 122.15 |
| 9.65 | Providing and fixing ISI marked oxidised M.S. door latches conforming to IS:5930 with screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.65.1 | 300x20x6 mm | nos | ₹ 98.35 |
| 9.65.2 | 250x20x6 mm | nos | ₹ 79.85 |
| 9.66 | Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.66.1 | 125 mm | nos | ₹ 39.95 |
| 9.66.2 | 100 mm | nos | ₹ 32.55 |
| 9.66.3 | 75 mm | nos | ₹ 29.7 |
| 9.67 | Providing and fixing oxidised M.S. hasp and staple (safety type) conforming to IS: 363 with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.67.1 | 150 mm | nos | ₹ 33.1 |
| 9.67.2 | 115 mm | nos | ₹ 29.7 |
| 9.67.3 | 90 mm | nos | ₹ 25.3 |
| 9.68 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) | ||
| 9.68.1 | 300 mm weighing not less than 330 grams | nos | ₹ 67.4 |
| 9.68.2 | 250 mm weighing not less than 280 grams | nos | ₹ 61.05 |
| 9.68.3 | 200 mm weighing not less than 240 grams | nos | ₹ 53.95 |
| 9.69 | Providing and fixing oxidised M.S. Safety chain with necessary fixtures for doors, (weighting not less than 450 gms) and Copper oxidised as per IS 1378 | nos | ₹ 100.6 |
| 9.70 | Providing and fixing IS: 12817 marked stainless steel butt hinges with stainless steel screws etc. complete: | ||
| 9.70.1 | 125x64x1.90 mm | nos | ₹ 118.2 |
| 9.70.2 | 100X58X1.90 mm | nos | ₹ 107.1 |
| 9.70.3 | 75x47x1.80 mm | nos | ₹ 80.05 |
| 9.70.4 | 50x37x1.50 mm | nos | ₹ 43.75 |
| 9.71 | Providing and fixing IS: 12817 marked stainless steel butt hinges (heavy weight) with stainless steel screws etc. complete: | ||
| 9.71.1 | 125x64x2.50 mm | nos | ₹ 129.85 |
| 9.71.2 | 100x60x2.50 mm | nos | ₹ 106.35 |
| 9.71.3 | 75x50x2.50 mm | nos | ₹ 89.3 |
| 9.72 | Providing and fixing bright finished brass butt hinges with necessary screws etc. complete: | ||
| 9.72.1 | 125x85x5.5 mm (heavy type) | nos | ₹ 268.65 |
| 9.72.2 | 125x70x4 mm (ordinary type) | nos | ₹ 185.15 |
| 9.72.3 | 100x85x5.5 mm (heavy type) | nos | ₹ 206.4 |
| 9.72.4 | 100x70x4 mm (ordinary type) | nos | ₹ 148.25 |
| 9.72.5 | 75x65x4 mm (heavy type) | nos | ₹ 173.4 |
| 9.72.6 | 75x40x2.5 mm (ordinary type) | nos | ₹ 101.85 |
| 9.72.7 | 50x40x2.5 mm (ordinary type) | nos | ₹ 40.9 |
| 9.73 | Providing and fixing bright finished brass parliamentary hinges with necessary screws etc. complete: | ||
| 9.73.1 | 150x125x27x5 mm | nos | ₹ 463.15 |
| 9.73.2 | 125x125x27x5 mm | nos | ₹ 414.6 |
| 9.73.3 | 100x125x27x5 mm | nos | ₹ 381.75 |
| 9.73.4 | 75x100x20x3.2 mm | nos | ₹ 339.2 |
| 9.74 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete: | ||
| 9.74.1 | 250x10 mm | nos | ₹ 441.6 |
| 9.74.2 | 200x10 mm | nos | ₹ 358.4 |
| 9.74.3 | 150x10 mm | nos | ₹ 287.25 |
| 9.74.4 | 100x10 mm | nos | ₹ 197.5 |
| 9.75 | Providing and fixing bright finished brass door latch with necessary screws etc. complete: | ||
| 9.75.1 | 300x16x5 mm | nos | ₹ 322.2 |
| 9.75.2 | 250x16x5 mm | nos | ₹ 308 |
| 9.76 | Providing and fixing bright finished brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | nos | ₹ 854.65 |
| 9.77 | Providing and fixing bright finished brass 100 mm mortice latch with one dead bolt and a pair of lever handles of approved quality with necessary screws etc. complete. | nos | ₹ 726.6 |
| 9.78 | Providing and fixing bright finished brass night latch of approved quality including necessary screws etc. complete. | nos | ₹ 1,183.3 |
| 9.79 | Providing and fixing special quality bright finished brass cupboard or ward robe locks with four levers of approved quality including necessary screws etc. complete. | ||
| 9.79.1 | 40 mm | nos | ₹ 311.2 |
| 9.79.2 | 50 mm | nos | ₹ 356.75 |
| 9.79.3 | 65 mm | nos | ₹ 362.4 |
| 9.79.4 | 75 mm | nos | ₹ 386.6 |
| 9.80 | Providing and fixing 50 mm bright finished brass cup board or wardrobe knob of approved quality with necessary screws. | nos | ₹ 74.25 |
| 9.81 | Providing and fixing bright finished brass handles with screws etc. complete: | ||
| 9.81.1 | 125 mm | nos | ₹ 256.65 |
| 9.81.2 | 100 mm | nos | ₹ 234.7 |
| 9.81.3 | 75 mm | nos | ₹ 184.95 |
| 9.82 | Providing and fixing bright finished brass hanging type floor door stopper with necessary screws, etc. complete. | nos | ₹ 121.65 |
| 9.83 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS: 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. | nos | ₹ 1,124.85 |
| 9.84 | Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS: 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete. | nos | ₹ 983.15 |
| 9.85 | Providing and fixing bright finished brass casement window fastener with necessary screws etc. complete. | nos | ₹ 89 |
| 9.86 | Providing and fixing bright finished brass casement stays (straight peg type) with necessary screws etc. complete: | ||
| 9.86.1 | 300 mm weighing not less than 330 gms | nos | ₹ 218.15 |
| 9.86.2 | 250 mm weighing not less than 280 gms | nos | ₹ 175.8 |
| 9.86.3 | 200 mm weighing not less than 240 gms | nos | ₹ 167.25 |
| 9.87 | Providing and fixing bright finished brass hasp and staple (safety type) with necessary screws etc. complete: | ||
| 9.87.1 | 150 mm | nos | ₹ 139.1 |
| 9.87.2 | 115 mm | nos | ₹ 126 |
| 9.87.3 | 90 mm | nos | ₹ 111.05 |
| 9.88 | Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles of approved quality with necessary screws etc. complete. | nos | ₹ 998.35 |
| 9.89 | Providing and fixing chromium plated brass night latch of approved quality including necessary screws etc. complete. | nos | ₹ 952.8 |
| 9.90 | Providing and fixing special quality chromium plated brass cupboard locks with six levers of approved quality including necessary screws etc. complete. | ||
| 9.90.1 | Size 40 mm | nos | ₹ 319.75 |
| 9.90.2 | Size 50 mm | nos | ₹ 333.95 |
| 9.90.3 | Size 65 mm | nos | ₹ 372.4 |
| 9.90.4 | Size 75 mm | nos | ₹ 409.35 |
| 9.91 | Providing and fixing chromium plated brass 50 mm cupboard or wardrobe knobs with nuts complete. | nos | ₹ 151.05 |
| 9.92 | Providing and fixing chromium plated brass handles with necessary screws etc. complete: | ||
| 9.92.1 | 125 mm | nos | ₹ 231.05 |
| 9.92.2 | 100 mm | nos | ₹ 206.25 |
| 9.92.3 | 75 mm | nos | ₹ 176.4 |
| 9.93 | Providing and fixing chromium plated brass casement window fastener with necessary screws etc. complete. | nos | ₹ 155.45 |
| 9.94 | Providing and fixing chromium plated brass casement stays (straight peg type) with necessary screws etc. complete: | ||
| 9.94.1 | 300 mm weighing not less than 330 gms | nos | ₹ 215.2 |
| 9.94.2 | 250 mm weighing not less than 280 gms | nos | ₹ 191 |
| 9.94.3 | 200 mm weighing not less than 240 gms ANODISED ALUMINIUM FITTINGS (ALL FITTINGS SHALL BE ISI MARKED) | nos | ₹ 166.8 |
| 9.95 | Providing and fixing ISI marked aluminium butt hinges anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete: | ||
| 9.95.1 | 125x75x4 mm | nos | ₹ 150.1 |
| 9.95.2 | 125x63x4 mm | nos | ₹ 126.65 |
| 9.95.3 | 100x75x4 mm | nos | ₹ 115.4 |
| 9.95.4 | 100x63x4 mm | nos | ₹ 104.75 |
| 9.95.5 | 100x63x3.2 mm | nos | ₹ 96.9 |
| 9.95.6 | 75x63x4 mm | nos | ₹ 87.9 |
| 9.95.7 | 75x63x3.2 mm | nos | ₹ 81.5 |
| 9.95.8 | 75x45x3.2 mm Note:- Aluminum hinges shall not be used in wooden shutters, stainless steel hinges shall be preferred. | nos | ₹ 76.5 |
| 9.96 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete: | ||
| 9.96.1 | 300x16 mm | nos | ₹ 303.25 |
| 9.96.2 | 250x16 mm | nos | ₹ 260.6 |
| 9.97 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: | ||
| 9.97.1 | 300x10 mm | nos | ₹ 130.1 |
| 9.97.2 | 250x10 mm | nos | ₹ 115.15 |
| 9.97.3 | 200x10 mm | nos | ₹ 99.7 |
| 9.97.4 | 150x10 mm | nos | ₹ 82.55 |
| 9.97.5 | 100x10 mm | nos | ₹ 64.7 |
| 9.98 | Providing and fixing aluminium pull bolt lock, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws bolts, nut and washers etc. complete. | nos | ₹ 100.8 |
| 9.99 | Providing and fixing 50 cm long aluminium kicking plate of size 100x3.15 mm, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete. | nos | ₹ 239.4 |
| 9.100 | Providing and fixing aluminium handles, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete: | ||
| 9.100.1 | 125 mm | nos | ₹ 66.25 |
| 9.100.2 | 100 mm | nos | ₹ 59.55 |
| 9.100.3 | 75 mm | nos | ₹ 51.75 |
| 9.101 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | ||
| 9.101.1 | Single rubber stopper | nos | ₹ 39.6 |
| 9.101.2 | Twin rubber stopper | nos | ₹ 72.35 |
| 9.102 | Providing and fixing aluminium casement stays, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. | nos | ₹ 71.5 |
| 9.103 | Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS: 1868) aluminium lever handles of approved quality with necessary screws etc. complete. | nos | ₹ 868.95 |
| 9.104 | Providing and fixing aluminium tee channels (heavy duty) with rollers & stop end in pelmets as curtain rod. | rmt | ₹ 160.35 |
| 9.105 | Providing and fixing partition upto ceiling height consisting of G.I. frame and required board, including providing and fixing of frame work made of special section power pressed/ roll form G.I. sheet with zinc coating of 120 gms/sqm(both side inclusive), consisting of floor and ceiling channel 50 mm wide having equal flanges of 32 mm and 0.50 mm thick, fixed to the floor and ceiling at the spacing of 610 mm centre to centre with dash fastener of 12.5 mm dia meter 50 mm length or suitable anchor fastener or metal screws with nylon plugs and the studs 48 mm wide having one flange of 34 mm and other flange 36 mm and 0.50 mm thick fixed vertically within flanges of floor and ceiling channel and placed at a spacing of 610 mm centre to centre by 6 mm dia bolts and nuts, including fixing of studs along both ends of partition fixed flush to wall with suitable anchor fastener or metal screws with nylon plugs at spacing of 450 mm centre to centre, and fixing of boards to both side of frame work by 25 mm long dry wall screws on studs, floor and ceiling channels at the spacing of 300 mm centre to centre. The boards are to be fixed to the frame work with joints staggered to avoid through cracks, M.S. fixing channel of 99 mm width (0.9 mm thick having two flanges of 9.5 mm each) to be provided at the horizontal joints of two boards, fixed to the studs using metal to metal flat head screws, including jointing and finishing to a flush finish with recommended jointing compound, jointing tape, angle beads at corners (25 mm x 25 mm x 0.5 mm), joint finisher and two coats of primer suitable for board as per manufacture’s specification and direction of engineer in charge all complete. | ||
| 9.105.1 | 75 mm overall thickness partition with 12.5 mm thick double skin fire rated Glass Reinforced Gypsum (GRG) plaster board conforming to IS: 2095: part 3 (Board with BIS certification marks) | sqm | ₹ 2,131.1 |
| 9.105.2 | 75 mm overall thickness partition with 12.5 mm thick double skin tapered edged plain Gypsum plaster board conforming to IS: 2095: (part I): 2011 (Board with BIS certification marks) | sqm | ₹ 1,818.15 |
| 9.105.3 | 66 mm overall thickness Partition with 8 mm thick double skin Calcium Silicate Board made with Calcareous & Siliceous materials reinforced with cellulose fiber manufactured through autoclaving process with Compressive Strength 225 kg/sq.cm, Bending Strength 100 kg./ sq.cm | sqm | ₹ 2,225 |
| 9.105.4 | 66 mm overall thickness partition using 8 mm thick, double skin multipurpose cement board Type-B, Category-III as per IS: 14862: 2000 reinforced with cellulose fibre manufactured through autoclaving process (High pressure steam cured) with suitable fibre cement screws | sqm | ₹ 2,062.85 |
| 9.105.5 | 66 mm overall thickness partition using 8 mm thick double skin multipurpose cement bonded wood particle board manufactured as per IS: 14276 with suitable cement bonded board screws | sqm | ₹ 2,034.4 |
| 9.106 | Providing and fixing PTMT handles with necessary screws etc. complete. | ||
| 9.106.1 | 125x34x24 mm weighing not less than 23 gms | nos | ₹ 42.95 |
| 9.106.2 | 150x34x24 mm weighing not less than 26 gms | nos | ₹ 41.55 |
| 9.107 | Providing and fixing PTMT Butt hinges with necessary screws etc. complete. | ||
| 9.107.1 | 75x60x10 mm fitted with 5.5 mm dia M.S. Bright Bar Rod weighing not less than 34 gms | nos | ₹ 75.9 |
| 9.107.2 | 100x75x10 mm fitted with 5.5 mm dia MS Bright Bar Rod weighing not less than 53 gms | nos | ₹ 89.1 |
| 9.108 | Providing and fixing PTMT Tower Bolts with 12 mm one piece rod inside and necessary screws etc., complete. | ||
| 9.108.1 | 152x42x18 mm weighing not less than 60 gms | nos | ₹ 69.75 |
| 9.108.2 | 202x42x18 mm weighing not less than 78 gms | nos | ₹ 106.15 |
| 9.109 | Providing and fixing PTMT door catcher of length 72 mm and dia. of 42 mm with suitable washers weighing not less than 33 gms | nos | ₹ 40.05 |
| 9.110 | Providing and fixing Bamboo jaffery/ fencing consisting of superior quality 25 mm dia (Average) half cut bamboo placed vertically and fixed together with three numbers horizontal running members of hollock wood in scantling of section 50X25 mm, fixed with nails and G.I wire on existing support complete as per direction of Engineer-in-charge. | sqm | ₹ 689.4 |
| 9.111 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. | ||
| 9.111.1 | 50x50 mm (base and height) | rmt | ₹ 354.35 |
| 9.112 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge. | rmt | ₹ 102.15 |
| 9.113 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge. | nos | ₹ 850.05 |
| 9.114 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete. | ||
| 9.114.1 | Triple strip vertical type | nos | ₹ 52.5 |
| 9.114.2 | Double strip (horizontal type) | nos | ₹ 39.7 |
| 9.115 | Providing and fixing powder coated telescopic drawer channels 300 mm long with necessary screws etc. complete as per directions of Engineer- in-charge. | set | ₹ 414.2 |
| 9.116 | Providing and fixing sliding arrangement in racks/ cupboards/cabinets shutter with stainless steel rollers to run inside C or E aluminium channel section (The payment of C or E channel shall be made separately) | nos | ₹ 20.4 |
| 9.117 | Providing and fixing factory made uPVC door frame made of uPVC extruded sections having an overall dimension as below (tolerance ±1mm), with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be Jointed with galvanized brackets and stainless steel screws, joints mitred and Plastic welded. The hinge side vertical of the frames reinforced by galvanized M.S. tube of size 19 X 19 mm and 1 mm (± 0.1 mm) wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturer’s specification and direction of Engineer- in-charge | ||
| 9.117.1 | Extruded section profile size 48x40 mm | rmt | ₹ 270.2 |
| 9.117.2 | Extruded section profile size 42x50 mm | rmt | ₹ 331.35 |
| 9.118 | Providing and fixing to existing door frames. | ||
| 9.118.1 | 24 mm thick factory made PVC door shutters made of styles and rails of a uPVC hollow section of size 59x24 mm and wall thickness 2 mm (± 0.2 mm) with inbuilt edging on both sides. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 20x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x24 mm and 2 mm (± 0.2 mm) wall thickness, fixed to the shutter styles by means of plastic/galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi-chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer- in-charge. (For W.C. and bathroom door shutter). | sqm | ₹ 2,969.25 |
| 9.118.2 | 30 mm thick factory made Polyvinyl Chloride (PVC) door shutter made of styles and rails of a uPVC hollow section of size 60x30 mm and wall thickness 2 mm (± 0.2 mm), with inbuilt decorative moulding edging on one side. The styles and rails mitred and joint at the corners by means of M.S. galvanised/ plastic brackets of size 75x220 mm having wall thickness 1.0 mm and stainless steel screws. The styles of the shutter reinforced by inserting galvanised M.S. tube of size 25x20 mm and 1 mm (± 0.1 mm) wall thickness. The lock rail made up of ‘H’ section, a uPVC hollow section of size 100x30 mm and 2 mm (± 0.2 mm) wall thickness fixed to the shutter styles by means of plastic/ galvanised M.S. ‘U’ cleats. The shutter frame filled with a uPVC multi- chambered single panel of size not less than 620 mm, having over all thickness of 20 mm and 1 mm (± 0.1 mm) wall thickness. The panels filled vertically and tie bar at two places by inserting horizontally 6 mm galvanised M.S. rod and fastened with nuts and washers, complete as per manufacturer’s specification and direction of Engineer-in- charge. | sqm | ₹ 3,253.8 |
| 9.118.3 | 25 mm thick PVC flush door shutters made out of a one piece Multi chamber extruded PVC section of the size of 762 mm X 25 mm or less as per requirement with an average wall thickness of 1 mm (± 0.3 mm). PVC foam end cap of size 23x10 mm are provided on both vertical edges to ensure the overall thickness of 25 mm. M.S. tube having dimensions 19 mm x 19 mm and 1.0 mm (± 0.1 mm) is inserted along the hinge side of the door. Core of the door shutter should be filled with High Density Polyurethane foam. The Top & Bottom edges of the shutter are covered with an end-cap of the size 25 mm X 11 mm. Door shutter shall be reinforced with special polymeric reinforcements as per manufacturer’s specification and direction of Engineer-in-charge to take up necessary hardware and fixtures. Stickers indicating the locations of hardware will be pasted at appropriate places | sqm | ₹ 3,068.85 |
| 9.119 | Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’s specification and direction of Engineer- in-Charge. | rmt | ₹ 492.7 |
| 9.120 | Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC ‘C’ channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the ‘C’ Channel using PVC solvent adhesive etc. complete as per direction of Engineer-in-charge, manufacturer’s specification & drawing. | ||
| 9.120.1 | 30 mm thick plain PVC door shutters | sqm | ₹ 3,182.95 |
| 9.120.2 | 30 mm thick pre laminated PVC door shutters | sqm | ₹ 3,663.8 |
| 9.121 | Providing and fixing Fiber Glass Reinforced plastic (FRP) Door Frames of cross-section 90 mm x 45 mm having single rebate of 32 mm x 15 mm to receive shutter of 30 mm thickness. The laminate shall be moulded with fire resistant grade unsaturated polyester resin and chopped mat. Door frame laminate shall be 2 mm thick and shall be filled with suitable wooden block in all the three legs. The frame shall be covered with fiber glass from all sides. M.S. stay shall be provided at the bottom to steady the frame. | rmt | ₹ 570.95 |
| 9.122 | Providing and fixing to existing door frames. | ||
| 9.122.1 | 30 mm thick Glass Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS: 14856, including fixing to frames. | sqm | ₹ 3,720.75 |
| 9.122.2 | 30 mm thick Fiberglass Reinforced Plastic (F.R.P.) flush door shutter in different plain and wood finish made with fire retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate all around, with suitable wooden blocks inside at required places for fixing of fittings and polyurethane foam (PUF)/Polystyrene foam to be used as filler material throughout the hollow panel, casted monolithically with testing parameters of F.R.P. laminate conforming to table - 3 of IS: 14856, complete as per direction of Engineer-in-charge. | sqm | ₹ 4,488.95 |
| 9.123 | Providing and fixing factory made door frame (single rebate) made out of solid foam PVC extruded profile of minimum 60 mm width and minimum 30 mm thickness, having homogenous fine cellular structure and integral smooth outer skin. The frame’s vertical and horizontal members to be mitered cut and joined together with PVC solvent adhesive / cement and both corners strengthened with fully threaded steel screws (of required size) fixed diagonally. The door frame is to be fixed to door jambs using 6 Nos. SS 304 grade minimum 8 mm dia CSK Phillips stainless steel self tapping screws/fasteners with PA6 grade polyamide sleeves both of required size, and gap if any between the door frame and the jamb must be filled with clear silicon, complete as per direction of the Engineer-in-Charge. | rmt | ₹ 696 |
| 9.123A | Providing PVC moulding / architrave for door frame made up of extruded solid foam PVC profile having homogenous fine cellular structure with smooth outer integral skin, minimum 30 mm width and minimum 12 mm thick suitable for fixing to frame. The molding shall be snap fitted in the groove provided in the frame & fixed with PVC solvent adhesive / cement and self tapping screws (of required size) complete as per direction of Engineer-in-Charge. | rmt | ₹ 135.8 |
| 9.124 | Providing and fixing factory made PVC door shutter made of solid foam PVC profiles of thikness 5 mm and 15 mm at edges integrally extruded for vertical style and horizontal (top/ bottom/ lock) rails of minimum cross section of 70mmx 28mm, of shape and design as per manufacturer’s specifications having homogenous fine cellular structure and smooth integral outer skin, inserted with G.I. ‘C’ section/ rectangular tube profile of minimum 0.30 mm thickness with 120 gsm coating as stiffeners as per manufacturer’s specifications Mitred cut joints for styles and rails provided with telescopic polymeric ‘L’ corners are jointed together using solvent adhesive and strenghtened with fully threaded stainless steel screws (of required size) through reinforced stiffener with paneling of specified solid foam PVC board/ high pressure laminate of required thickness and of approved design and shade (matching the styles and rails), secured within styles and rails with specially designed solid foam PVC moulded beadings of required size using PVC solvent adhesive/ cement. The finished door shutter including SS hardware, 1 no. ss sliding bolt 200 x 10mm, 1 no. SS tower bolt 200 x 10 mm and 2 nos. SS handles 125mm, shall be fixed to frame with 3 nos. stainless steel hinges of minimum size 100x58x1.9 mm and stainless steel screws of required size complete as per direction of the Engineer-in-Charge. (Cost of above hardware is inclusive in rates) | ||
| 9.124.1 | 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type. | sqm | ₹ 3,754.2 |
| 9.124.2 | 5 mm thick solid foam PVC panel of required size with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Decorative type. | sqm | ₹ 4,138.35 |
| 9.124.3 | 3 mm thick high pressure laminate (decorative type) with moulded/ extruded beading of appropriate design shape and size as per manufacturer’s specifications ( to secure the panel insert tight in place within the style and rails of shutter) matching the colour and shade of shutter frame. Non decorative type. | sqm | ₹ 4,678.95 |
| 9.126 | Providing and fixing 12 mm thick panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. | ||
| 9.126.1 | Marine plywood conforming to IS: 710 | sqm | ₹ 2,486.25 |
| 9.126.2 | Fire retardant plywood conforming to IS: 5509 | sqm | ₹ 2,777.7 |
| 9.127 | Providing & Fixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS: 2046 Type S, including cost of adhesive of approved quality. | ||
| 9.127.1 | 1.5 mm thick | sqm | ₹ 1,045.95 |
| 9.127.2 | 1.0 mm thick | sqm | ₹ 897.3 |
| 9.128 | Providing and fixing factory made Fiberglass Reinforced plastics (F.R.P.) chajja 4 mm thick of required colour, size and design made by Resin Transfer Moulding (RTM) Machine Technology, resulting in void free compact laminate in single piece, having smooth gradual slope curvature for easy drainage of water and duly reinforced by 2 nos vertically and 1 nos horizontally 50x2 mm thick M.S. flat with 12 mm in built hole for grouting on the existing wall along with the 50 mm flanges duly inserted and sealed in the wall complete in one single piece casted monolithically, including all necessary fittings. The FRP Chajja should be manufactured using unsaturated Polyester resin as per IS: 6746, duly reinforced with fibre glass chopped strand mat (CSM) as per IS: 11551 complete with protective Gel coat U/V coating on Top for complete resistance from the extreme of temperature, weather & sunlight (Only plan area of chajjas shall be measured for making payment). | sqm | ₹ 5,207.45 |
| 9.129 | Providing and fixing cup board shutters 25 mm thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked, exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge | sqm | ₹ 2,307.35 |
| 9.130 | Providing and fixing cup board shutters with 25 mm thick veneered particle board IS: 3097 marked, exterior grade (Grade I), of approved make, including IInd class teak wood lipping of 25 mm wide x 12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of Engineer-in-Charge. | ||
| 9.130.1 | With decorative veneering on one side and commercial veneering on other side | sqm | ₹ 1,927.5 |
| 9.130.2 | With non decorative veneering on both sides | sqm | ₹ 1,809.4 |
| 9.131 | Providing and fixing factory made shutters of Pre-laminated particle board flat pressed three layer or graded wood particle board with one side decorative finish and other side balancing lamination conforming to IS: 12823 Grade l Type ll, of approved design, and edges sealed with water resistant paint and lipped with aluminium ‘U’ type edge beading all- round the shutter, including fixing with angle cleat, grip strip, cadmium plated steel screws, including fixing of aluminium hinges 100x63x4 mm etc. complete as per architectural drawing and direction of Engineer-in- Charge (Cost of ‘U’ beading and hinges will be paid for separately). | ||
| 9.131.1 | 25 mm thick | sqm | ₹ 1,801.6 |
| 9.132 | Providing and fixing aluminum U beading of required size to Pre- laminated/flush door shutter, including fixing etc. complete as per direction of Engineer-in-charge. | kg | ₹ 596.15 |
| 9.133.1 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. — Tapered edge calcium silicate board made with calcareous & siliceous materials reinforced with cellulose fiber manufactured through autoclaving process to give stable crystalline structure with compressive strength 225 kg/ sq.cm, Bending strength 100 kg/sq.cm. | ||
| 9.133.1.1 | 10 mm thick | sqm | ₹ 1,790.95 |
| 9.133.2 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. — Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. — Multipurpose cement board reinforced with suitable fibre cement screw. | ||
| 9.133.2.1 | 8 mm thick cement fibre board, Type- B, Category- III as per IS: 14862: 2000 | sqm | ₹ 1,443.45 |
| 9.133.2.2 | 8 mm thick Cement bonded wood particle board as per IS:14276 | sqm | ₹ 1,427.8 |
| 9.133.3 | Providing and fixing, in position concealed G.I. section for wall paneling using board of required thickness fixed on the ‘W’ profile (0.55 mm thick) having a knurled web of 51.55 mm and two flanges of 26 mm each with lips of 10.55 mm, placed @ 610 mm C/C in perimeter channel having one flange of 20 mm and another flange of 30 mm with thickness of 0.55 mm and web of length 27 mm. Perimeter channel is fixed on the floor and the ceiling with the nylon sleeves @ 610 mm C/C with fully threaded self-tapping dry wall screws. Board is fixed to the ‘W’ profile with 25 mm countersunk ribbed head screws @ 200 mm C/C., all complete as per the drawing & directions of engineer-in-charge, the joints of the boards are finished with specially formulated jointing compound and 48 mm wide jointing tape to provide seamless finish. — Plain Gypsum plaster board conforming to IS: 2095 Part -1:2011 (Board with BIS certification marks) | ||
| 9.133.3.1 | 12.5 mm thick | sqm | ₹ 1,308.85 |
| 9.134.1 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: — Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: — 35 mm thick shutters | ||
| 9.134.1.1 | with ISI marked M.S. pressed butt hinges bright finished of required size 9.134.1.1.1 Second class teak wood 9.134.1.1.2 Kiln seasoned and chemically treated hollock wood 9.134.1.1.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 5,024.15 |
| 9.134.1.2 | With ISI marked stainless steel butt hinges of required size 9.134.1.2.1 Second class teak wood 9.134.1.2.2 Kiln seasoned and chemically treated hollock wood 9.134.1.2.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 5,217.65 |
| 9.134.2 | Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: — Providing and fixing wire gauge shutters using stainless steel grade 304 wire gauge with wire of dia 0.5 mm and average width of aperture 1.4 mm in both directions for doors, windows and clerestory windows with necessary screws: — 30 mm thick shutters | ||
| 9.134.2.1 | with ISI marked M.S. pressed butt hinges bright finished of required size 9.134.2.1.1 Second class teak wood 9.134.2.1.2 Kiln seasoned and chemically treated hollock wood 9.134.2.1.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 4,498.6 |
| 9.134.2.2 | With ISI marked stainless steel butt hinges of required size 9.134.2.2.1 Second class teak wood 9.134.2.2.2 Kiln seasoned and chemically treated hollock wood 9.134.2.2.3 Kiln seasoned selected class of sheesham wood | sqm | ₹ 4,692.1 |
| 9.135 | Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia. 0.50 mm all complete. | ||
| 9.135.1 | With 2nd class teak wood beading 62X19 mm | sqm | ₹ 1,597.15 |
| 9.135.2 | With 12 mm mild steel U beading | sqm | ₹ 1,228 |
| 9.136 | Providing and fixing fire resistant door frame of section 143 x 57 mm having built in rebate made out of 16 SWG G.I. sheet (zinc coating not less than 120 gm/sqm) duly filled with vermuculite based concrete mix, suitable for mounting 60 minutes fire rated door shutters. The frame is fitted with intumuscent fire seal strip of size 10x4 mm (minimum) alround the frame and fixing with dash fastener of approved size and make, including applying a coat of approved brand fire resistant primer etc. complete as per direction of Engineer-in-charge (Dash fastener to be paid for separately). | rmt | ₹ 1,709.25 |
| 9.137 | Providing and fixing 50 mm thick glazed fire resistant door shutters of 60 minutes fire rating conforming to IS:3614 (Part-II), tested and certified as per laboratory approved by Engineer-in-charge, with suitable mounting on door frame, consisting of vertical styles, lock rail, top rail 100 mm wide, bottom rail 200 mm wide, made out of 16 SWG G.I.sheet (zinc coating not less than 120 gm/sqm) duly filled FR insulation material and fixing with necessary stainless steel ball bearing hinges of approved make, including applying a coat of approved fire resistant primer etc. all complete as per direction of Engineer-in-charge (panneling to be paid for separately). | sqm | ₹ 7,533.2 |
| 9.138 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-charge with glass of required thickness having 60 minutes of fire resistance both integrity & radiation control (EW60) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredits labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. | sqm | ₹ 40,405.55 |
| 9.139 | Providing and fixing panic bar / latch (Double point) fitted with a single body, Trim Latch & Lock on back side of the Panic Latch of reputed brand and manufacture to be approved by the Engineer- in- charge, all complete. | nos | ₹ 8,366.15 |
| 9.140 | Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). | ||
| 9.140.1 | 12 mm thick commercial ply conforming to IS: 1328 BWR type | sqm | ₹ 1,224.65 |
| 9.141 | Providing and fixing PVC Door Frame of size 50x47 mm with a wall thickness of 5 mm (± 0.2 mm), made out of single piece extruded PVC profile, with mitred cut joints and joint with 2 nos of PVC bracket of size 190 mm x 100 mm long arms of cross section size 35 x 15 mm & self driven self taping screws, the vertical door profiles to be reinforced with 40x20 mm M.S. rectangular tube of 0.8 mm, including providing EPDM rubber gasket weather seal throughout the frame, including jointing 5 mm PVC frame strip with PVC solvent cement on the back of the profile. The door frame to be fixed to the wall using 8 x100 mm long anchor fasteners complete, all as per manufacturer’s specification and direction of Engineer -in- charge. | rmt | ₹ 573.45 |
| 9.142 | 35 mm thick factory made Solid panel PVC Door shutter, made out of single piece extruded soild PVC profiles, 5 mm (± 0.2 mm) thick, having styles & rails (except lock rail) of size 95 mmx 35 mm x 5 mm, out of which 75 mm shall be flat and 20 mm shall be tapered (on both side), having one side thickness of 15 mm integrally extruded on the hinge side of the profile for better screw holding power, including reinforcing with MS tube of size 40 mm X 20 mm x 1 mm, joints of styles & rails to be mitered cut & joint with the help of PVC solvent cement, self driven self tapping screws & M.S. rectangular pipes bracket of size 190 mm X 100 mm of cross section size 35 mm x 17 mm x 1 mm at each corner. Single piece extruded 5 mm thick solid PVC Lock rail of size 115 mm x 35 mm, out of which 75 mm to be flat and 20 mm to be tapered at both ends, having 15 mm solid core in middle of rail section integrally extruded, fixing the styles & rails with the help of solvent and self driven self tapping screws of 125 mm x 11 mm, including providing 5 mm Single piece solid PVC extruded sheet inserted in the door as panel, all complete as per manufacturer’s specification and direction of Engineer-in-charge. | ||
| 9.142.1 | Non decorative finish (matt finish) | sqm | ₹ 3,997.45 |
| 9.142.2 | Decorative finish (wood grained finish) | sqm | ₹ 4,713.05 |
| 9.143 | Providing and Fixing factory made uPVC door frame, made of uPVC exturded sections, of size 65 mm x 55 mm with wall thickness 2.0 mm (± 0.2 mm), corners of the door frame to be mitred cut and jointed with plastic brackets and stainless steel screws, reinforcing hinge side vertical of the frames with PVC profile of Size 28 mm x 30 mm having wall thickness 2 mm (±0.2 mm), including providing & fixing 3 nos of 125 mm long stainless steel hinges to the frame, fixing the frame with jamb with required number & size of anchor dash fastners, all complete as per manufacturer’s specification and direction of Engineer-in-charge. | rmt | ₹ 623 |
| 9.144 | Providing and fixing 37 mm thick factory made PVC door shutter, styles and rails made of PVC hollow section of size 100 mm x 37 mm with wall thickness 2 mm (± 0.2 mm), with inbuilt bead on one side, styles and rails mitered cut and joint at the corners by means of 2 nos of plastic brackets of size 75 mm x 220 mm at each corner and stainless steel screws, reinforcing the hinge side of style by inserting PVC profile of size 28 mm x 30 mm, with wall thickness 2 mm ( ± 0.2 mm). Lockrail of size 100 mm x 37 mm, wall thickness 2 mm (+ 0.2 mm) will be fixed to the vertical styles. Providing with PVC snapfit beads and panel of size 100 mm x 20 mm, and inserting 2 nos tie bar of 6 mm dia and fastening with nuts and washers complete, all as per manufacturer’s specification and direction of Engineer-in-charge. | sqm | ₹ 4,076.05 |
| 9.145 | Providing and Fixing factory made PVC door frame made of PVC extruded sections of size 75 mm x 53 mm, having wall thickness 2.0 mm (± 0.2 mm). Both vertical sides of the frame reinforced with PVC profile of cross section size 28 mm x 30 mm x 2 mm thickness (± 0.2 mm) and 75 mm x 200 mm long, including reinforcing both ends of the top frame with PVC profile. PVC Door Frame and PVC reinforcement profile to be mitred cut, jointed and fusion welded together, including providing and fixing 3 nos of 125 mm long stainless steel hinges to frame, fixing the frame with jamb with required nos & sizes of anchor dash fastener, all complete as per manufacturer’s specification and direction of engineer- in-charge. | rmt | ₹ 763.85 |
| 9.146 | Providing and fixing 37 mm thick factory made PVC Door shutter, styles and rails made of PVC hollow extruded printed and laminated section having overall dimension 115 mm x 37 mm with wall thickness 2 mm (± 0.2 mm) with inbuilt beading on one side, the styles and rails mitred cut and joint at corners by inserting 2 nos PVC profile reinforcement of size 75 mm x 200 mm long with cross section size of 28 mm x 30 mm having wall thickness 2 mm (± 0.2 mm). Styles, rails and reinforcements to be fusion welded together. Only hinge side vertical style to be reinforced with PVC profile reinforcement in full length. Printed and laminated PVC lock rail of size 110 mm x 37 mm having wall thickness 2 mm (± 0.2 mm) to be welded horizontally with the vertical styles after inserting PVC profile reinforcement as in styles and rails, providing with PVC snap fit beading, panels of 100 x 20 mm printed & laminated and inserting 2 nos 6 mm dia bright steel rod horizontally with both side threaded and tightened with check nuts and washers complete, all as per manufacturer’s specification and direction of engineer-in-charge. | sqm | ₹ 4,362 |
| 9.147 | Providing and fixing factory made uPVC glazed/wire mesh windows/ doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10 mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367: Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for: (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds 9.147.A1 Two track two panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A1.1 Using R2 series with frame (40 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). 9.147.A1.2 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height upto 1.8m). 9.147.A1.3 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system (Height above 1.8m). 9.147.A2 Two track four panels sliding windows with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, nylon rollers with SS 304 body. 9.147.A2.1 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) (Height upto 1.8m). 9.147.A2.2 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) (Height above 1.8m). 9.147.A3 Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A3.1 Using R2 series with frame (65 mm & above) x (40 mm & above) & glazed sash (25 mm & above) x (50 mm & above) & fly screen sash (18 mm & above) x (40 mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre). 9.147.A3.2 Using R3 series with frame (85 mm & above) x (40 mm & above) & glazed sash (30 mm & above) x (55 mm & above) & fly screen sash (20 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8 metre). 9.147.A4 Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A4.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & both glazed and fly screen sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). 9.147.A4.2 Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi-point locking system. (Height upto 1.8m). 9.147.A4.3 Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on every glazed panel along with multi- point locking system. (Height above 1.8m) 9.147.A5 Three track three panels sliding window with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. 9.147.A5.1 Using R2 series with frame (70 mm & above) x (40 mm & above) & sash (25 mm & above) x (50 mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre). 9.147.A5.2 Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system (Height upto 1.8 metre). 9.147.A5.3 Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (55 mm & above) with zinc alloy (zamak) powder coated handle on two end panels along with multi-point locking system. (Height above 1.8 metre). 9.147.B1 Two track two panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on every panel along with multi-point locking system, adjustable nylon rollers with SS 304 body. 9.147.B1.1 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). 9.147.B1.2 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). 9.147.B2 Two track four panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on three panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. 9.147.B2.1 Using R3 series with frame (55 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). 9.147.B2.2 Using R4 series with frame (64 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). 9.147.B3 Three track three panels sliding door with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. 9.147.B3.1 Using R3 series with frame (98 mm & above) x (40 mm & above) & both glazed and fly screen sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). 9.147.B3.2 Using R4 series with frame (115 mm & above) x (45 mm & above) & both glazed and fly screen sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). 9.147.B4 Three track three panels sliding door with Aluminium channel for roller track, wool pile, zinc alloy (zamak) powder coated handle on two panels along with multi-point locking system, adjustable nylon rollers with SS 304 body. 9.147.B4.1 Using R3 series with frame (98 mm & above) x (40 mm & above) & sash (30 mm & above) x (74 mm & above). (Height upto 2.5 metre). 9.147.B4.2 Using R4 series with frame (115 mm & above) x (45 mm & above) & sash (44 mm & above) x (85 mm & above). (Height above 2.5 metre). 9.147.C1 Fixed window / ventilator without mullion / transom. 9.147.C1.1 Using R1 series with frame (33 mm & above) x (35 mm & above). (Height upto 0.90 metre) 9.147.C1.2 Using R2 series with frame (39 mm & above) x (39 mm & above). (Height upto 1.2 metre) 9.147.C1.3 Using R3 series with frame (55 mm & above) x (45 mm & above). (Height upto 2.5 metre) 9.147.C1.4 Using R4 series with frame (64 mm & above) x (50 mm & above). (Height above 2.5 metre) 9.147.C2 Fixed window / ventilator with mullion / transom. 9.147.C2.1 Using R1 series with frame (33 mm & above) x (35 mm & above) & mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre) 9.147.C2.2 Using R2 series with frame (39 mm & above) x (39 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) 9.147.C2.3 Using R3 series with frame (55 mm & above) x (45 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 2.5 metre) 9.147.C2.4 Using R4 series with frame (64 mm & above) x (50 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 2.5 metre) 9.147.D1 Ventilator Casement window single panel with or without fixed panel with S.S. 304 friction hinges as per size and weight of sash, single point locking zinc alloy (zamak) powder coated handles. 9.147.D1.1 Using R1 series with frame (33 mm & above) x (35 mm & above) & sash /mullion (33 mm & above) x (50 mm & above). (Height upto 0.90 metre). 9.147.D1.2 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash /mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) 9.147.D1.3 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash /mullion (55 mm & above) x (65 mm & above). (Height above 1.2 metre) 9.147.E1 Casement window single panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 9.147.E1.1 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above). (Height upto 1.2 metre) 9.147.E1.2 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above). (Height upto 1.8 metre) 9.147.E1.3 Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above). (Height above 1.8 metre) 9.147.E2 Casement window double panels with fixed mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 9.147.E2.1 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre). 9.147.E2.2 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre). 9.147.E2.3 Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre). 9.147.E3 Casement window double panels with French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 9.147.E3.1 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & French (False) mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre). 9.147.E3.2 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 1.8 metre). 9.147.E3.3 Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height above 1.8 metre). 9.147.E4 Casement cum fixed panel window having one single casement panel & one fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 9.147.E4.1 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre; each openable shutter upto 0.8m width) 9.147.E4.2 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre; each openable shutter upto 0.8m width) 9.147.E4.3 Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre; each openable shutter upto 0.8m width) 9.147.E5 Casement cum fixed panel window having single casement panel at both ends & middle fixed panel with S.S 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles. 9.147.E5.1 Using R2 series with frame (39 mm & above) x (39 mm & above) & sash (39 mm & above) x (60 mm & above) & mullion (39 mm & above) x (60 mm & above). (Height upto 1.2 metre; each openable shutter upto 0.8m width) 9.147.E5.2 Using R3 series with frame (55 mm & above) x (45 mm & above) & sash (55 mm & above) x (65 mm & above) & mullion (55 mm & above) x (65 mm & above). (Height upto 1.8 metre; each openable shutter upto 0.8m width) 9.147.E5.3 Using R4 series with frame (64 mm & above) x (50 mm & above) & sash (64 mm & above) x (70 mm & above) & mullion (64 mm & above) x (70 mm & above). (Height above 1.8 metre; each openable shutter upto 0.8m width) 9.147.E6 Casement Window with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel 9.147.E6.1 Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre) 9.147.E7 Casement Window with Double Rebate Frame with two Side Hung Glazed Panel and two Side Hung wire mesh Panel and Fixed Mullion with S.S. 304 friction hinges as per size and weight of sash, multi-point locking system, zinc alloy (zamak) powder coated handles on both glazed and fly screen panel. 9.147.E7.1 Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & mullion (55 mm & above) x (65 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre) 9.147.E8 Casement Window with Double Rebate Frame with two Side Hung Glazed Panel on outside and two Side Hung wire mesh Panel on inside and French (False) Mullion with S.S. 304 friction hinges as per size and weight of sash, multi- point locking system, zinc alloy (zamak) powder coated handles with shoot bolt on both glazed and fly screen panel. 9.147.E8.1 Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (65 mm & above) & fly screen sash (30 mm & above) x (55 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above) & metal grill (if required to be paid separately). (Height upto 1.8 metre). 9.147.F1 Casement door single panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. 9.147.F1.1 Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) (Height upto 2.5 metre). 9.147.F1.2 Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above). (Height above 2.5 metre). 9.147.F2 Casement door double panel with French (False) Mullion with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides. 9.147.F2.1 Using R3 series with frame (55 mm & above) x (50 mm & above) & sash (55 mm & above) x (85 mm & above) & French (False) mullion (55 mm & above) x (60 mm & above). (Height upto 2.5 metre). 9.147.F2.2 Using R4 series with frame (64 mm & above) x (55 mm & above) & sash (64 mm & above) x (100 mm & above) & French (False) mullion (64 mm & above) x (60 mm & above). (Height above 2.5 metre). 9.147.F3 Casement Door with Double Rebate Frame with one Side Hung Glazed Panel and one Side Hung wire mesh Panel with zinc alloy (zamak) 3D hinges, multi-point locking system with cylinder, zinc alloy (zamak) powder coated handles on both sides of glazed panel and zinc alloy (Zamak) powder coated handle along with multi-point locking system on one side of fly screen panel. 9.147.F3.1 Using R3 series with frame (110 mm & above) x (45 mm & above) & glazed sash (55 mm & above) x (85 mm & above) & fly screen sash (55 mm & above) x (65 mm & above). (Height upto 2.5 metre). | sqm | ₹ 8,298.85 |
| 9.148 | Providing and fixing stainless steel (SS-304 grade) friction hinges to the side/top hung uPVC windows, of approved quality, with necessary stainless steel screws etc. as per direction of Engineer-in-charge. | ||
| 9.148.1 | 200 x 19 x 1.9 mm | nos | ₹ 381.3 |
| 9.148.2 | 250 x 19 x 1.9 mm | nos | ₹ 422.55 |
| 9.148.3 | 300 x 19 x 1.9 mm | nos | ₹ 459.55 |
| 9.148.4 | 350 x 19 x 1.9 mm | nos | ₹ 624.6 |
| 9.148.5 | 400 x 19 x 1.9 mm | nos | ₹ 610.35 |
| 9.149 | Providing and fixing casement handle made of zinc alloyed (white powder coated) for uPVC casement window with necessary screws etc. complete. | nos | ₹ 231.05 |
| 9.150 | Providing and fixing zinc alloyed (white powder coated) touch lock for uPVC sliding window with necessary screws etc. complete. | nos | ₹ 204 |
| 9.151 | Providing and fixing steel roller for uPVC sliding window with necessary screws etc. complete. | nos | ₹ 115.8 |
| 9.152 | Providing and fixing steel roller for uPVC sliding door with necessary screws etc. complete. | nos | ₹ 185.5 |
| 9.153 | Providing and fixing steel (white power coated) crescent lock for uPVC sliding window/ door with necessary screws etc. complete. | nos | ₹ 198.3 |
| 9.154 | Providing and fixing frame work for partitions/ wall lining etc. made of 50x50x1.6 mm hollow MS tube, placed along the walls, ceiling and floor in a grid pattern with spacing @ 60 cm centre to centre both ways (vertically & horizontally) or at required spacing near opening, with necessary welding at junctions and fixing the frame to wall/ ceiling/ floors with steel dash fasteners of 8 mm dia, 75 mm long bolt, including making provision for opening for doors, windows, electrical conduits, switch boards etc., including providing with two coats of approved steel primer etc. complete, all as per direction of Engineer-in-charge. | kg | ₹ 166.8 |
| 9.155 | Providing and fixing panelling or paneling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebated to be measured). Panelling for panelled and glazed shutters 25 mm to 40 mm thick: Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587 | sqm | ₹ 1,956.9 |
| 9.156 | Providing and fixing Pre -laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to frame, backing or studding with screws etc. complete (Frames, backing or studding to be paid separately). | ||
| 9.156.1 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 12 mm thick conforming to IS:14587 | sqm | ₹ 1,031.5 |
| 9.156.2 | Pre-laminated with decorative lamination on both side exterior Grade - I MDF Board 18 mm thick conforming to IS:14587 | sqm | ₹ 1,248 |
| 9.157 | Providing and fixing Pre-laminated medium density fibre board IS: 14587:1998 marked, with one side decorative lamination other side balancing lamination Grade-I (exterior grade) in shelves with screws and fittings wherever required, edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand (fittings to be paid separately). | ||
| 9.157.1 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 18 mm thick conforming to IS:14587 | sqm | ₹ 1,415.7 |
| 9.157.2 | Pre-laminated with decorative lamination one side and other side balancing lamination exterior Grade - I MDF Board 25 mm thick conforming to IS:14587 | sqm | ₹ 1,874.7 |
| 9.158 | Providing and fixing in wall lining medium density fibre board IS: 14587:1998 marked, Pre-laminated one side decorative lamination and other side balancing lamination, with necessary fixing arrangement and screws etc. complete. | ||
| 9.158.1 | 12 mm thick. | sqm | ₹ 1,212.75 |
| 9.158.2 | 18 mm thick. | sqm | ₹ 1,436.55 |
| 9.158.3 | 25 mm thick. | sqm | ₹ 1,912.25 |
| 9.159 | Providing and fixing 25 mm thick pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked with one side decorative and other side balancing lamination for cupboard shutters edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand including ISI marked nickel plated bright finishing M.S. piano hinges conforming to IS:3818 marked with necessary screw etc all complete. | sqm | ₹ 2,135.25 |
| 9.160 | Providing and fixing skirting with Pre-laminated medium density fibre board exterior grade (Grade-I) conforming to IS: 14587:1998 marked, with (one side decorative and other side balancing lamination and edges to be sealed with PVC edge bending tape 2.00 mm thick of approved brand with necessary fixing arrangements and screws, including drilling necessary holes for rawl plugs etc. all complete. | ||
| 9.160.1 | 18 mm thick. | sqm | ₹ 2,076.65 |
| 9.160.2 | 25 mm thick. | sqm | ₹ 2,552.4 |
| 9.161 | Providing and fixing fire resistant door frame of section 50 x 60 mm on horizontal side & 35 x 60 mm on vertical sides having built in rebate made out of 1.6 mm thick GI sheet (Zinc coating not less than 120 gm/sqm) suitable for mounting 120 minutes Fire Rated Glazed Door Shutters. The frame shall be filled with mineral wool Insulation having density minimum 96Kg/sqm. The frame will have a provision of G.I. anchor fastners 14 nos (5 each on vertical style & 4 on horizontal style of size M10 x 80) suitable for fixing in the opening along with factory made template for SS ball bearing hinges of size 100x89x3 mm for fixing of fire rated glazed shutter. The frame shall be finished with an approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per the directions of Engineer - in- Charge. (Cost of SS ball bearing hinges is excluded). | rmt | ₹ 2,202.9 |
| 9.162 | Providing and fixing 60 mm thick glazed fire resistant door shutters of 120 minutes Fire rating conforming to IS:3614 (Part II) or EN1634-1:1999, tested and certified as per laboratory approved by Engineer-in-Charge, with suitable mounting on door frame, consisting of vertical styles, top rail & side rail 60 mm x 60 mm wide and bottom rail of 110 mm x 60 mm made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/ sqm) duly filled mineral wool insulation having density minimum 96 kg/ cum and fixing with necessary stainless steel ball bearing hinges of size 100x89x3 mm of approved make, including applying a coat of approved fire resistant primer or powder coating not less than 30 micron etc all complete as per direction of Engineer-in-Charge (panelling to be paid for seperately). | sqm | ₹ 12,017.9 |
| 9.163 | Providing and fixing non load bearing fixed frame for fire resistant glazed partition for 120 minutes fire rating, made out to a profile of dimension 60 mm x 70 mm of 1.6 mm thick galvanised steel sheet as per test evidence suitable for fixing fire rated glass for 120 minutes of both integrity & radiation control (EW120) & minimum 20 minutes of insulation (EI20).The profile has to be fixed to the supporting construction by means of anchor fasteners of size M10 x 80, every 150 mm from the edges and every 500 mm (approx) c/c. Linear measurement of frame shall be measured for payment. The frame shall be filled with mineral wool insulation of density minimum 96kg/ cum and finished with a approved fire resistant primer or powder coating of not less than 30 micron in desired shade as per NBC 2016, IS 16231 (Part 3):2016 and directions of Engineer - in- Charge. | rmt | ₹ 2,202.9 |
| 9.164 | Providing and fixing glazing in fire resistant door shutters, fixed panels & partitions etc., with G.I. beading made out of 1.6 mm thick G.I. sheet (zinc coating not less than 120 gm/sqm) of size 20 x 33 mm screwed with M4 x 38 mm SS screws at distance 75 mm from the edges and 150 mm c/c, including applying a coat of approved fire resistant primer/ powder coating of not less than 30 micron on G.I. beading, & special ceramic tape of 5 x 20 mm size etc complete in all respect as per NBC 2016, IS 16231 (Part 3):2016 and as per direction of Engineer-in-Charge with glass of required thickness having 120 minutes of fire resistance both integrity & radiation control (EW120) and minimum 20 minutes of insulation (EI20). The manufacturer have to give test report/certification of fire glass and the glass should have the stamp showing the value of E, EW & EI. The glass shall be tested in approved NABL accredited lab or by any other accreditation body which operates in accordance with ISO/IEC 17011 and accredited labs as per ISO/IEC 17025 for testing and calibration scopes shall be eligible. The maximum glazing size shall not be more than 1100x2200 mm (w x h) or 2.42 sqm. | sqm | ₹ 43,677.65 |
| 9.165 | Providing and fixing bright /matt finished Stainless Steel handles of approved quality & make with necessary screws etc all complete. | ||
| 9.165.1 | 125 mm | nos | ₹ 119.2 |
| 9.165.2 | 100mm | nos | ₹ 90.45 |
| 9.165.3 | 75 mm | nos | ₹ 58.75 |
| 9.166 | Providing and fixing 18 mm thick both sides Pre-laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. in partitions, boxes, shelves, racks and cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge (Note: Fittings to be paid separately). | ||
| 9.166.1 | 18 mm thick | sqm | ₹ 1,362.3 |
| 9.167 | Providing and fixing 6 mm thick both sides Pre-laminated cement bonded wood particle board as per IS: 15786:2008 of approved brand and shade with suitable full threaded steel screws etc. on the backing of racks, drawer, cupboard, kitchen cabinet under kitchen counter etc. all complete as per direction of Engineer-in-charge. | sqm | ₹ 1,010.6 |
| 9.168 | Providing and fixing cupboard shutter with 19 mm thick one side decorative and other side balancing lamination factory pressed BWP grade marine ply as per IS 710 of approved brand including 2 mm thick PVC edge banding tape with hot glue by edge bending machine etc. with auto closing spring loaded hinges (hydraulic type) etc. complete as per direction of Engineer-in-charge. (Payment of providing and fixing auto closing hinges shall be paid separately) | sqm | ₹ 2,829.25 |
| 9.169 | Providing and fixing 19 mm thick both side balancing lamination factory pressed BWP grade marine ply as per IS: 710 of approved brand boxes,shelves,racks,almirah,cupboard and drawer etc. including necessary nails,screws etc. complete as per direction of Engineer-in- charge. | sqm | ₹ 2,593.15 |
| 9.170 | Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. | ||
| 9.170.1 | 200 mm | nos | ₹ 186.65 |
| 9.171 | Providing and fixing stainless steel soft closing spring hinges at 0 degree hinges (hydraulic type) of approved make/brand to cupboard shutters with full threaded steel screws including making necessary recess in board and finished etc. complete as per direction of Engineer-in-charge. | nos | ₹ 272 |
| 9.172 | Providing and fixing stainless steel soft closing heavy type telescopic drawer channels of approved make 500 mm long with screws etc. complete as per direction of Engineer- in-charge. | set | ₹ 885.1 |
| 9.173 | Providing and fixing ready made 304 grade stainless steel Modular kitchen basket and accessories such as right angle basket (Plain Cup & Saucer, plant, Partition, Bottle rack, Thali, Cutlery) kitchen utensil basket, Dinner set basket, kitchen grain basket, Multipurpose basket as per site requirement including finishing (wherever required) and fittings. The same shall be fixed with necessary stainless steel nuts & bolts, Stainless Steel screws & telescopic channel etc. as per direction of Engineer-in- charge. (For payment purpose only weight of Stainless steel basket shall be considered excluding weight of all fixing accessories such as nuts, bolts, fasteners telescopic basket channels etc. Payment of providing and fixing telescopic channel shall be paid separately) | kg | ₹ 533.25 |
| 9.174 | Providing and fixing 2 mm thick 16 to 19 mm wide PVC edge binding tape of approved quality for cupboard/wardrobe shutters including necessary synthetic resin hot pressed to edges on binding machine etc. complete as per direction of Engineer- in-charge. | rmt | ₹ 43.8 |
Make the estimate with these rates. BESTimate fills the description, unit and rate when you pick the item code — Measurement, Abstract and Summary in Excel.Try BESTimate →
Source: Delhi Schedule of Rates 2023 (Vol. 1 & 2), Central Public Works Department — Delhi market rates as on 01.04.2023; apply the cost index for your place and date. Rates are shown as published; check the official book and its correction slips before you submit an estimate. BESTimate is not issued by or affiliated with this department.
Need the full estimate, not just one item?
BESTimate makes the whole government-format estimate — Measurement, Abstract and Summary in Excel — with BMC, PWD, CPWD, MJP and CIDCO rates built in. Launching 26 November 2026 · first 99 to pre-register get 50% off for 6 months.
Made free with BESTimate by F K Consultant · estimate.fkconsultant.com/calculators · approximate figures — check against your drawings and local rates.