Structural Steel Works

← All sections of BMC USOR 2023 (Buildings)

Code	Description	Unit	Rate
R3-CS-SS-01	Providing, detailing, fabricating and fixing at desired location using hot rolled sections and MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), transporting to site and erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary fixtures and operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge. (The qty. for this item shall be measured for gusset plates, base plates, bolts in M.T.)	MT	₹ 90,876
R3-CS-SS-02	Providing, detailing, fabricating and fixing built up sections at desired location using MS Plates of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), erecting structural steel members for all heights & at all levels including provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.	MT	₹ 88,029
R3-CS-SS-03	Providing, detailing, fabricating and fixing erecting GI cold formed sections (GSM 120 Min), confirming to the physical specifications of ASTM A-607 (Grade 50) having minimum yield strength of 345 N/mm2 and as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer) for all heights & at all levels including transportion of the same to site, erection, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, and all necessary operations like straightening, cutting, drilling as specified, welding, cleaning, grinding and removing the welding burr etc. complete as directed by Engineer In Charge.	MT	₹ 64,253
R3-CS-SS-04	Providing, detailing, composite fabricating members like Trusses, N-girders, girders, bracings, supports, purlins, runners, and similar structural steel members fabricated using M.S. hollow tubular steel sections (circular & rectangular pipes), of TATA Structura Make or equivalent conforming to IS 1239 part 1 and 2 and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transportion of the same to site, erection of structural steel members for all heights & at all levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, gussets, base plate, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding, removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.	MT	₹ 86,743
R3-CS-SS-05	Providing and Fixing of Foundation Bolts and nuts in RCC column / pedestal / beam at any level including maintaining the accuracy towards line, level & position including making and using the template etc. complete as directed by Engineer In Charge. (Contractor will take due care for its threads and rusting by applying grease and cotton waste.	MT	₹ 311,456
R3-CS-SS-06	Providing and fixing the Mechanical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning and anchoring the bolt as per manufacturers specifications etc. complete as directed by Engineer In Charge.
R3-CS-SS-06-a	M8 x 115	nos	₹ 67
R3-CS-SS-06-b	M10 x 110	nos	₹ 71
R3-CS-SS-06-c	M12 x 115	nos	₹ 81
R3-CS-SS-06-d	M16 x 140	nos	₹ 87
R3-CS-SS-06-e	M20	nos	₹ 121
R3-CS-SS-07	Providing and fixing the Chemical Anchor Fasteners as specified below of Hilti Make or equivalent confirming to IS 1367 (Part 3) at required locations and level including drilling the hole, cleaning with blow pump and anchoring the bolt with chemical as per manufacturers specifications etc. complete as directed by Engineer In Charge.
R3-CS-SS-07-a	M10 x 90 foil capsule (HVU) & M10 x 130 Rod	nos	₹ 213
R3-CS-SS-07-b	M12 x 110 foil capsule (HVU) & M12 x 160 Rod	nos	₹ 327
R3-CS-SS-07-c	M16 x 125 foil capsule (HVU) & M16 x 190 Rod	nos	₹ 433
R3-CS-SS-07-d	M20 x 170 foil capsule (HVU) & M20 x 240 Rod	nos	₹ 579
R3-CS-SS-07-e	M24 x 210 foil capsule (HVU) & M24 x 290 Rod	nos	₹ 677
R3-CS-SS-08	Providing, detailing, fabricating and fixing at desired location using M.S. chequered Plates of any thickness and of grade Fe 250 as per specifications and approved fabrication drawings (which are to be prepared by Contractor and got approved from Engineer), including transporation of the same to site, erection at all heights and levels, provision of necessary erection bolts, fixing bolts, nuts, washers, cleats, stiffeners, and all necessary operations like preheating as per specifications, straightening, bending, cutting, drilling, grinding, machining if specified, welding, grinding and removing the welding burr and preparing surface for painting with wire brush cleaning and applying two coats of epoxy red oxide zinc phosphate primer of 30 microns each and two coats of Epoxy Corrosion Resistant Enamel paint of 30 microns after fabrication including touching up with spray painting after erection etc complete as directed by Engineer In Charge.	MT	₹ 92,523
R3-CS-SS-09	Providing and fixing G.I. barbed wire fencing of 14 guage having 2 ply and 4 points at 75 mm c/c in the rows and with vertical supports as specified below embeded 0.45 m in the concrete block of size 0.3x0.3x0.5m, and 1.55m above the same spaced at 2.5 m c/c with inclined stays of the same material at 20 m c/c fixed in M15 grade cement concrete base block having dimension 0.3 x 0.3 x 0.5 m, including cross wires in each bay, necessary excavation, backfilling and curing etc. complete as directed by Engineer In Charge.
R3-CS-SS-09-a	With MS Angle 45 x 45 x 6 mm including painting with one coat of anti- corrosive paint, and two coats of approved enamel paint. and 10 rows of Barbed wire.	rmt	₹ 907
R3-CS-SS-09-b	With MS Angle 40 x 40 x 6 mm including painting with one coat of anti- corrosive paint, and two coats of approved enamel paint. and 8 rows of Barbed wire	rmt	₹ 817
R3-CS-SS-09-c	With coal tarred jungle wood ballies of 100 – 125 mm diameter as specified and 10 rows of Barbed wire.	rmt	₹ 441
R3-CS-SS-09-d	With coal tarred jungle wood ballies of 100 – 125 mm diameter as specified and 8 rows of Barbed wire.	rmt	₹ 419
R3-CS-SS-10	Providing and fixing G.I. barbed wire fencing 10 rows of 14 guage having two ply four points at 75 mm c/c fixed on RCC poles made of M20 grade concrete embeded 0.5m in M15 grade cement concrete block of size 0.45 x 0.45 x 0.5 m at 2.5m c/c below finished ground level and 1.55 m above the same including inclined stays at every 20 m embeded in the concrete block of the concrete grade M15, cross wire in each bays, necessary excavation, backfilling, curing etc. complete as directed by Engineer In Charge. (The size of concrete pole shall be 0.10 m x 0.10 m. at top and 0.125 m x 0.125 m. at bottom having 2.05 m height. The concrete stays shall be of the same size and having length 2.43 m erected 45 degree angle fixed at the topmost wire)	rmt	₹ 693
R3-CS-SS-11	Providing and fixing G.I. barbed wire fencing 8 rows of 14 guage having two ply four points at 75 mm c/c fixed on RCC poles made of M20 grade concrete embeded 0.5m in M15 grade cement concrete block of size 0.45 x 0.45 x 0.5 m at 2.5m c/c below finished ground level and 1.55 m above the same including inclined stays at every 20 m embeded in the concrete block of the concrete grade M15, cross wire in each bays, necessary excavation, backfilling, curing etc. complete as directed by Engineer In Charge. (The size of concrete pole shall be 0.10 m x 0.10 m. at top and 0.125 m x 0.125 m. at bottom having 2.05 m height. The concrete stays shall be of the same size and having length 2.43 m erected 45 degree angle fixed at the topmost wire)	rmt	₹ 517
R3-CS-SS-12	Providing and fixing 750mm dia concertina barbed razeer type coil of 19mm wide ribbon with thickness 5 SWG and central core wire of 12 SWG with anti rust coating, supported over 5 rows of barbed wires of 14 SWG having two ply four points at 75 mm c/c, fixed to Y shape angle bracket placed at 2.5m c/c (leg of Y should be 0.51 m long and 0.23 m embeded in concrete, wing of Y should be 0.475 m long having a distance of 0.58 m between the two wing on the top) made up of 50mm x 6 mm M.S. angle embeded in cement concrete bed block of size 300mm x 300mm x 300mm. The concertina coil should be fixed to angle with M.S. Flat 25mm x 5mm thick on both the sides as runner all steel work shall be applied with one coat of red oxide zinc chromate primer and two coat of Synthetic Enamel paint etc. complete as directed by Engineer In Charge.	rmt	₹ 579
R3-CS-SS-13	Supplying, fabricating, transportation to site and Fixing Galvanized Chain Link Fencing of 10 gauge G.I. Mesh, sizes 50 x 50 mm diamond pattern, fixed 75 mm below finished ground level / coping, including providing and erecting ISA 50x50x6 angle posts @ 2.5m C/C with cross support at every 8th pole & at corners and 2 nos 6mm dia MS bars at top and bottom with necessary U hooks, nuts and bolts, washers, total height of fencing @ 2.0m above ground including embedding the angle post in concrete block of 0.45m x 0.45m x 0.6m of cement concrete M15 grade including necessary excavation, and cleaning, preparing the surface, applying one coat of red oxide zinc chromate primer and two coats of Synthetic Enamel paint of approved manufacture, brand, colour, shade etc. complete as directed by Engineer In Charge. (first coat of synthetic enamel paint after fabrication and second coat after erection including touching up the primer coat)	sqm	₹ 1,116
R3-CS-SS-14	Providing and fixing G.I. crimped wire mesh of required openings of size 25 mm x25 mm or of any size with main and cross wires of 10 gauge approved type as per manufacture’s specifications with necessary fittings including painting with one coat of one coat of red oxide zinc chromate primer and two coats of approved synthetic enamal paint etc. complete as directed by Engineer In Charge. (Iron works will be paid separately. The clear visible area of the wire mesh exclusive overlap will be paid for).	sqm	₹ 1,345
R3-CS-SS-15	Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 25 to 30 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.	sqm	₹ 4,670
R3-CS-SS-16	Providing, detailing, and fabricating as per specifications, transporting to site and erecting MS Openable / Sliding / Ornamental Entrance Gates including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets decorative balusters, arrow heads etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 60 to 65 kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.	sqm	₹ 9,819
R3-CS-SS-16-a	Providing, detailing, and fabricating as per specifications, transporting to site and erecting Openable Entrance Gates fabricated using B Class GI Hollow pipes including track and wheel, locking arrangement, fixing bolts, nuts, washers, cleats, stiffeners, gussets and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding etc. complete weighing 18 to 20kg/Sqm, including cleaning, Grinding and removing the welding burr and preparing surface and applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of Synthetic Enamel paint after erection, with approved colour, shade and brand etc. including touching up with primer etc. complete as directed by Engineer In Charge.	sqm	₹ 3,671
R3-CS-SS-17	Providing, fabricating and fixing 1.0m high Cast Iron hand railing including decorative studs at regular interval, painting with one coat of red oxide zinc chromate primer and two coats of synthetic enamel paint etc complete as directed by Engineer In Charge.	rmt	₹ 2,090
R3-CS-SS-18	Providing, fabricating, welding and fixing 1.0m high MS pipe hand railing, weight 10 to 12 kg per Rmt including all necessary fixtures, holdfasts, supports and painting with one coat of red oxide zinc chromate primer and two coats of approved synthetic enamel paint etc complete as directed by Engineer In Charge.	rmt	₹ 1,036
R3-CS-SS-19	Providing, fabricating M.S. ornamental railing of simple geometrical design weighing as specified below with country teak wood moulded hand rail 10 cm x 5 cm with winders and newel posts complete if required with 3 coats of french polish or synthetic enamal paint, fixing the M.S. railing securely in floor, wall etc. as directed by Engineer In Charge.
R3-CS-SS-19-a	M.S. ornamental railing weighing 10 kg to 15 kg per sqmt.	sqm	₹ 1,844
R3-CS-SS-19-b	M.S. ornamental railing weighing above 15 kg and upto 20 kg per sqmt.	sqm	₹ 2,149
R3-CS-SS-19-c	M.S. ornamental railing weighing above 20 kg and upto 25 kg per sqmt.	sqm	₹ 2,454
R3-CS-SS-20	Providing and Fixing decorative Teak wood moulded hand rail of 100mm x 50mm cross section supported over 1.0m high railing fabricated using 12mm Sq MS Bar placed about 100mm c/c vertically and 50mm x 5mm MS Flat at top and bottom including applying one coat of red oxide zinc chromate primer and two coat of Synthetic Enamel paint to Iron work and three coats of melamine polish to wood work, fixing the assembly with anchorefastners or plumbing nails to floor or wall as may be required etc complete as directed by Engineer In Charge.	rmt	₹ 3,082
R3-CS-SS-21	Providing and Fixing decorative PVC moulded hand rail supported over 1.0m high railing fabricated using 12mm Sq MS Bar placed about 100mm c/c vertically and 50mm x 5mm MS Flat at top and bottom including applying one coat of red oxide zinc chromate primer and two coat of Synthetic Enamel paint to Iron work and three coats of melamine polish to wood work, fixing the assembly with anchorefastners or plumbing nails to floor or wall as may be required etc complete as directed by Engineer In Charge.	rmt	₹ 2,902
R3-CS-SS-22	Providing, detailing, and fabricating as per specifications, transporting to site and erecting M.S. ladder using hot rolled sections, hollow pipes (Hollow pipes conforming to IS 1239 part 1 and 2) including, fixtures and fastenings, cleats, stiffeners, gussets, etc. and all necessary operations like straightening, bending, cutting, drilling, grinding, machining if specified, welding, removing the welding burr, cleaning etc., fixing in cement concrete block of grade M15, and preparing surface, applying one coat of red oxide zinc chromate primer and one coat of Synthetic Enamel paint after fabrication and second coat of synthetic enamel paint after erection, with approved colour, shade and brand etc. complete as directed by Engineer In Charge.	kg	₹ 148
R3-CS-SS-23	Providing, detailing, and fabricating as per specifications, transporting to site and erecting ladder / railing using stainless steel hollow pipes of grade 304 including, S.S. fixtures and fastenings, cleats, stiffeners, gussets etc. and all necessary operations straightening, bending, like cutting, drilling, welding, grinding and removing the welding burr, machining if specified, finishing, cleaning etc. complete as directed by Engineer In Charge.	kg	₹ 620
R3-CS-SS-24	Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 75 mm. 'B' class.	rmt	₹ 1,082
R3-CS-SS-25	Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 50 mm. 'C' class	rmt	₹ 964
R3-CS-SS-26	Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 75 mm. 'C' class	rmt	₹ 1,184
R3-CS-SS-27	Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 150 mm. 'B' class.	rmt	₹ 1,944
R3-CS-SS-28	Providing and fixing M. S. black pipes for columns, including base plate & cap plate 6 mm. thick foundation bolts, nuts, etc., complete with 3 coats of approved synthetic paint etc., complete as directed. Pipes shall be of Tata or equivalent make. Dia of pole 150 mm. 'C' class	rmt	₹ 2,088
R3-CS-SS-29	Providing & fixing G. I. corrugated sheet door of size 0.76 m. x 1.9 m. with G. I. sheet shutter of 22 gauge and G. I. sheet box frame of 18 guage filled with 1 : 2 : 4 cc. including all fixtures i. e. aldrops, tadi, tower bolt, hold fast, handle, hinges including painting etc. complete as directed.	rmt	₹ 2,407
R3-CS-SS-30	Providing and fixing structural Profile decking sheet as per particular specification,with GI sheet, zinc coating not less than 275 GSM as per IS 277 and of yield strength 500 Mpa of approved make with specified Base Metal Thickness. The profile shall be structural decking profile having ribs & pitch as per the drawing referred with the embossments (shear groove) on top and side of the ribs for better composite action. The decking sheet shall be fabricated to required form as per the slab design and fixed with Galvanised Iron fasteners, self drilling screws, shear studs as per IS 1367, connectors etc. complete as per design, drawing and direction of Engineer-in- Charge. (Refer typical drwg). Plan area of the sheeting shall be measured and paid for.Structural steel frame work, reinforcement steel and concrete shall be paid seperately.
R3-CS-SS-30-a	With Base Metal Thickness (BMT) (excluding Zinc coat thickness) 1.00 mm thick Profile decking sheet .	sqm	₹ 1,041
R3-CS-SS-30-b	With Base Metal Thickness (BMT) (excluding Zinc coat thickness) 1.20 mm thick Profile decking sheet.	sqm	₹ 1,278
R3-CS-SS-30-c	With Base Metal Thickness (BMT) (excluding Zinc coat thickness) 1.60 mm thick Profile decking sheet.	sqm	₹ 1,464
R3-CS-SS-30-d	Providing and fixing structural Profile decking sheet as per particular specification,with GI sheet, zinc coating not less than 275 GSM as per IS 277 and of yield strength 500 Mpa of approved make with specified Base Metal Thickness. The profile shall be structural decking profile having ribs & pitch as per the drawing referred with the embossments (shear groove) on top and side of the ribs for better composite action. The decking sheet shall be fabricated to required form as per the slab design and fixed with Galvanised Iron fasteners, self drilling screws, shear studs as per IS 1367, connectors etc. complete as per design, drawing and direction of Engineer-in- Charge. (Refer typical drwg).The sheet shall be filled with 75mm thick M25 grade concrete reinforced with 8mm dia. HYSD bars placed 150mm C/C both ways. Plan area of the sheeting shall be measured and paid. Structural steel frame work shall be paid seperately. With Base Metal Thickness (BMT) (excluding Zinc coat thickness) 1.00 mm thick Profile decking sheet .	sqm	₹ 1,748
R3-CS-SS-31	Providing, fabricating & fixing in position S.S. 304 grade pipe railing for staircase consisting of 18 gauge 50 mm dia. S.S.pipe as top rail,18 gauge 40 mm dia S.S. pipe as verticals, 18 gauge 25 mm dia as secondary rails, including fixing the verticals to the staircase pardi by means of base plate with socket & anchor fasteners,grinding the welded portion smooth,buffing, protecting the railing members by means of wrappers during construction etc. complete as directed by the Engineer in charge.	rmt	₹ 2,892
R3-CS-SS-32	Providing & fixing S.S. pipe hand rail along the wall in staircase or ramps or passages consisting of 50 mm dia. 18 gauge 304 grade stainless steel pipe. Supported with 25 mm 18 gauge S.S. pipe (304grade) brackets & 5mm thick tapered edge coller base plate fixed to wall with SS screws at approx. 600 mm center to center fixed horizontally or in inclined position at required height including grinding the welded joints, buffing,protecting the railing members by means of wrappers during construction etc. complete as per detailed drawing as directed by the Engineer in charge.	rmt	₹ 1,473
R3-CS-SS-33	Supplying & Installing Stainless Steel Railing of GoldernIndustriesPvt.Ltd.with Top rail using S.S.Pipe of Grade AISI -304 using 51 mm diapipe with wall thickness of 1:6 mm inclding fabrication ,Cleaning ,Buffing & polishing etc.complete. MidrailbyusingS.S.PipeofGrade AISI -304 with 2 Nos.S.S.pipes of 16 mm dia& 12 mm thicktoughened glass pannel including fabrication, Cleaning ,Buffing &polishing etc. complete .& The BALUSTAR is to be of satin finishstainless steel vertical post ( Balustar ) of AISI 304 grade of 47R4series ,etc.complete.(The height of the railing is to be 1.00 meter)	sqm	₹ 5,312

Source: Unified Schedule of Rates 2023 (Buildings), Municipal Corporation of Greater Mumbai. Rates are shown as published; check the official book and its correction slips before you submit an estimate. BESTimate is not issued by or affiliated with this department.

Made free with BESTimate by F K Consultant · estimate.fkconsultant.com/calculators · approximate figures — check against your drawings and local rates.