Plastering Works

← All sections of BMC USOR 2023 (Buildings)

Code	Description	Unit	Rate
R3-CS-PL-01	Providing and applying 6 mm thick internal sand faced ceiling plaster in cement mortar 1:3 at all heights and locations in single coat for concrete surfaces including scaffolding, hacking of concrete surface, watering, finishing, curing etc. complete.	sqm	₹ 286
R3-CS-PL-02	Providing and applying 6 mm thick internal ceiling plaster in cement mortar 1:3 with neeru finish at all heights and locations in single coat for concrete surfaces including scaffolding, hacking of concrete surface, watering, finishing, curing etc. complete.	sqm	₹ 382
R3-CS-PL-03	Providing and applying 6 mm thick internal ceiling plaster in single coat in cement mortar 1:3 with white cemetecious wall putty (Birla white or equivalent) finish at all heights and locations for concrete surfaces including hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.	sqm	₹ 370
R3-CS-PL-04	Providing and applying 12 mm thick internal sand faced plaster in cement mortar 1:3 at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.	sqm	₹ 314
R3-CS-PL-05	Providing and applying 12 mm thick internal plaster in cement mortar 1:3 with neeru finish at all heights and locations in one coat for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.	sqm	₹ 427
R3-CS-PL-06	Providing and applying 12 mm thick internal plaster in one coat in cement mortar 1:3 with white cementicious wall putty (Birla or equivalent) at all heights and locations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete.	sqm	₹ 415
R3-CS-PL-07	Providing and applying 12 mm thick internal plaster with neeru finish by using ready-mix mortar as per manufacturers recommendations at all heights and locations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.	sqm	₹ 468
R3-CS-PL-08	Providing and applying 20 mm thick internal sand faced cement plaster at all heights and locations in cement mortar specified below in two coats for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.
R3-CS-PL-08-a	In cement mortar 1:2	sqm	₹ 560
R3-CS-PL-08-b	In cement mortar 1:3	sqm	₹ 541
R3-CS-PL-08-c	In cement mortar 1:4	sqm	₹ 519
R3-CS-PL-09	Providing and applying 20 mm thick internal plaster with neeru finish at all heights and locations in cement mortar specified below in two coats for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, watering, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.
R3-CS-PL-09-a	In cement mortar 1:2	sqm	₹ 655
R3-CS-PL-09-b	In cement mortar 1:3	sqm	₹ 636
R3-CS-PL-09-c	In cement mortar 1:4	sqm	₹ 615
R3-CS-PL-10	Providing and applying 20 mm thick internal plaster with neeru finish by using ready-mix Roofit mortar at all heights and locations as per manufacturers recommendations for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.	sqm	₹ 573
R3-CS-PL-11	Providing and applying 30 to 40 mm thick internal sand faced cement plaster to the all types of stone masonry walls, concrete surfaces at all heights and locations in cement mortar 1:4 in three coats including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)	sqm	₹ 758
R3-CS-PL-12	Providing and applying 30 to 40 mm thick internal cement plaster with neeru finish to the all types of stone masonry walls, concrete surfaces at all heights and locations in cement mortar 1:4 in three coats including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)	sqm	₹ 853
R3-CS-PL-13	Providing and applying 13 mm thick internal plaster in gypsum (Stuccoplaster) of approved make with neat smooth finish at all heights and locations for masonry (except stone masonry) and concrete surfaces including scaffolding, hacking of concrete surface, finishing etc. complete as per manufacturers specifications and as directed by Engineer In Charge.	sqm	₹ 423
R3-CS-PL-14	Providing and applying 12 mm thick sand faced external cement plaster for soffit of slabs & stair, beams, columns, chajja etc. upto 10m from ground level and at all locations in cement mortar as specified below including providing water proofing compound to the first coat of plaster as per manufacturers specification, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.
R3-CS-PL-14-a	In cement mortar 1:1	sqm	₹ 368
R3-CS-PL-14-b	In cement mortar 1:2	sqm	₹ 345
R3-CS-PL-14-c	In cement mortar 1:3	sqm	₹ 333
R3-CS-PL-15	Providing and applying 20 mm thick external sand faced cement plaster upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding, etc complete as directed By Engineer In Charge.
R3-CS-PL-15-a	In cement mortar 1:3	sqm	₹ 542
R3-CS-PL-15-b	In cement mortar 1:4	sqm	₹ 520
R3-CS-PL-16	Providing and applying 20 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)
R3-CS-PL-16-a	In cement mortar 1:1	sqm	₹ 657
R3-CS-PL-16-b	In cement mortar 1:2	sqm	₹ 618
R3-CS-PL-16-c	In cement mortar 1:3	sqm	₹ 612
R3-CS-PL-17	Providing and applying 25 mm thick external sand faced cement plaster with neat cement rendering upto 10m from ground level and at all locations in cement mortar proportion specified below in two coats for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)
R3-CS-PL-17-a	In Cement mortar 1:1	sqm	₹ 728
R3-CS-PL-17-b	In cement mortar 1:2	sqm	₹ 679
R3-CS-PL-17-c	In Cement mortar 1:3	sqm	₹ 655
R3-CS-PL-18	Providing and applying 20 mm thick external sand faced cement plaster by using ready-mix mortarupto 10m from ground level and at all locations in two coats for masonry (except stone masonry) and concrete surfaces including racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc. complete.	sqm	₹ 617
R3-CS-PL-19	Providing and applying 20 mm thick external colour crete cement plaster made up of colour crete cement of approved quality and khrasalia sand upto 10m from ground level and at all locations in cement mortar 1:2 including 12 mm thick base coat as directed to match existing khandkee work with joints emphasized properly as specified for masonry (except stone masonry) and concrete surfaces including providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)	sqm	₹ 566
R3-CS-PL-20	Providing and applying 20 mm thick external Malad crete cement plaster made of Malad chip powder for masonry (except stone masonry) and concrete surfaces upto 10m from ground level and at all locations in cement mortar 1:2 including 12 mm thick base coat for brickwork and concrete surfaces including, providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)	sqm	₹ 662
R3-CS-PL-21	Providing and applying 25 mm thick external plaster with sea gravel finish upto 10m from ground level and at all locations in cement mortar 1:3 in two coats for masonry (except stone masonry) and concrete surfaces as directed including, providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge. Min. time lag between two coats shall be 24 hours.(as per IS 2402 of 1963.)	sqm	₹ 428
R3-CS-PL-22	Providing and applying 25 mm thick (average) external sand faced cement rough cast plaster upto 10m from ground level and at all locations in cement mortar 1:4 in two coats for masonry (except stone masonry) and concrete surfaces including, providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, providing bands, drip moulds, grooves etc. finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	sqm	₹ 887
R3-CS-PL-23	Providing and applying 30 to 40 mm thick external sand faced rough cast cement plaster upto 10m from ground level and at all locations in cement mortar 1:4 in two coats for masonry (except stone masonry) and concrete surfaces including, providing water proofing compound to the first coat of plaster as per manufacturers specification, racking out joints, hacking of concrete surface, providing bands, drip moulds, grooves etc. finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	sqm	₹ 975
R3-CS-PL-24	Providing and applying 15 mm thick external sand faced cement plaster upto 10m from ground level and at all locations in cement mortar 1:4 in two coats for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, providing bands, drip moulds, grooves etc. finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	sqm	₹ 289
R3-CS-PL-25	Extra for every additional height of 3 m or part thereof above 10m from ground level for all types of external plastering.	sqm	₹ 71
R3-CS-PL-26	Providing and applying cement plaster for band projections of 25 to 30mm thk. and 75 to 125 mm wide, with smooth/ decorative/ rough finsihed surface, at all heights and locations in cement mortar 1:3 for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 128
R3-CS-PL-27	Providing and applying cement plaster for band projections of 25 to 30mm thk. and 150 to 200mm wide, with smooth/ decorative/ rough finsihed surface, at all heights and locations in cement mortar 1:3 for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 152
R3-CS-PL-28	Providing and applying cement plaster for molded architrave of 25 to 40mm thk and 75 to 125mm wide, with smooth/ decorative/ rough finsihed surface, at all heights and locations in cement mortar 1:3 for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 139
R3-CS-PL-29	Providing and applying cement plaster for molded architrave of 25 to 40mm thk and 150 to 200mm wide, with smooth/ decorative/ rough finsihed surface, at all heights and locations in cement mortar 1:3 for masonry (except stone masonry) and concrete surfaces including, racking out joints, hacking of concrete surface, finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 160
R3-CS-PL-30	Extra for 12 to 20mm wide and 6 to 12mm in depth forming groove in 20 to 25 mm thick plaster including scaffolding, finishing, curing etc complete as directed By Engineer In Charge.	rmt	₹ 68
R3-CS-PL-31	Marking letters and numerals upto 75mm height formed of plaster projections finished with cement or neeru and three coats of cement or synthetic enamel paint of an approved tint/color and make as directed at all heights and locations including curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 196
R3-CS-PL-32	Marking letters and numerals more than 75mm and upto 150mm height formed of plaster projections finished with cement or neeru and three coats of cement or synthetic enamel paint of an approved tint/color and make as directed at all heights and locations including providing bands, drip moulds, grooves etc. finishing, curing, scaffolding etc complete as directed By Engineer In Charge.	rmt	₹ 222
R3-CS-PL-33	Extra for providing and mixing water proofing material Conplast X4211C (Fosroc) or equivalent in cement plaster work in proportion recommended by the manufacturers. (Per bag of cement of 50 kg used in the mix.)	Per bag of cement of 50 kg used in the mix.	₹ 12
R3-CS-PL-34	Providing & Fixing bird wired mesh/wired fabric (12.5mm x 24 SWG) in strips of 200 mm width or as required over junctions of concrete & brick / block masonry or any other specified location at all heights including minimum 200mm overlap at all joints / junction prior to plastering, drilling, nailing etc. complete as directed By Engineer In Charge.	sqm	₹ 263
R3-CS-PL-35	Extra for providing and mixing polypropylene fibers in mortar of internal and external plaster. The dose of 6mm long fibers shall be 125gms per 50 kg of cement bag or as per the manufactures specifications etc complete as directed by Engineer In Charge	kg	₹ 66
R3-CS-PL-36	Providing flush pointing to block/brick masonry work at all heights and locations in cement mortar 1:2, including raking of joints upto the depth of 15mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.	sqm	₹ 245
R3-CS-PL-37	Providing raised and cut pointing to block/brick masonry work at all heights and locations in cement mortar 1:2, including raking of joints upto the depth of 15mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.	sqm	₹ 373
R3-CS-PL-38	Providing flush pointing to any kind of stone masonry work at all heights and locations in cement mortar 1:2 as specified below, including raking of joints upto the depth of 20mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.
R3-CS-PL-38-a	In Cement mortar 1:1	sqm	₹ 315
R3-CS-PL-38-b	In cement mortar 1:2	sqm	₹ 312
R3-CS-PL-39	Providing raised and cut pointing to any kind of stone masonry work at all heights and locations in cement mortar 1:2, including raking of joints upto the depth of 20mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.	sqm	₹ 480
R3-CS-PL-40	Providing tuck pointing to any kind of stone masonry work at all heights and locations in cement mortar 1:1, including, removing the old pointing, raking of joints upto the depth of 20mm, finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge.	sqm	₹ 332
R3-CS-PL-41	1:2 etc. complete.including raking of joints , finishing, curing, cleaning the surface etc. complete as directed by Engineer In Charge. Providing and applying 12 mm thick internal plaster in cement mortar 1:4 with white cementicious wall putty (Birla	sqm	₹ 96
R3-CS-PL-42	white or equivalent) finish at all heights and locations for concrete surfaces including hacking of concrete surface, watering, finishing, curing, scaffolding etc. complete. Providing and applying Plaster of Paris punning to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including R3-CS-PL- roughening of existing surface making 6 mm groove at SQM 318 skirting and door, window jamb, sill, lintel, etc. complete. The rate is exclusive of base coat cement plaster. Providing & applying synthetic plaster "Renova" in metalic finish in 4 coats , base coat to be applied using trowel and the remaining three coats to be applied by brush as per manufacturer specifications on backing R3-CS-PL- coat of 16mm cement plaster ( 16 mm cement plaster SQM 2300 will be paid under separate item ) including cost & conveyance of all materials, labour charges, preparing the surface, scaffolding etc. complete all as directed by Engineer - in - Charge.	sqm	₹ 414
R3-CS-PL-43	Providing and applying Plaster of Paris punning to walls, beams, ceilings, columns in perfect line and level over the base of single coat cement plaster including roughening of existing surface making 6 mm groove at skirting and door, window jamb, sill, lintel, etc. complete. The rate is exclusive of base coat cement plaster.	sqm	₹ 318
R3-CS-PL-44	Providing & applying synthetic plaster "Renova" in metalic finish in 4 coats , base coat to be applied using trowel and the remaining three coats to be applied by brush as per manufacturer specifications on backing coat of 16mm cement plaster ( 16 mm cement plaster will be paid under separate item ) including cost & conveyance of all materials, labour charges, preparing the surface, scaffolding etc. complete all as directed by Engineer - in - Charge.	sqm	₹ 2,300
R3-CS-PL-45	P&F in position Gypsum board false ceiling with 12.5mm	sqm	₹ 969
R3-CS-PL-46	hanger size-25mmx0.5mm thk.)complete. Providing and Fixing Modular False Ceiling of "	sqm	₹ 1,174
R3-CS-PL-49	Rebate for not P/A neeru finish on Internal cement plaster	sqm	₹ 96
R3-CS-PL-50	Providing and applying 6 mm thick internal plaster (to Celing only) in gypsum (Stuccoplaster) of approved make with neat smooth finish at all heights and locations for masonry (except stone masonry) and concrete surfaces including scaffolding, hacking of concrete surface, finishing etc. complete as per manufacturers specifications and as directed by Engineer In Charge.	sqm	₹ 351

Source: Unified Schedule of Rates 2023 (Buildings), Municipal Corporation of Greater Mumbai. Rates are shown as published; check the official book and its correction slips before you submit an estimate. BESTimate is not issued by or affiliated with this department.

Made free with BESTimate by F K Consultant · estimate.fkconsultant.com/calculators · approximate figures — check against your drawings and local rates.