Aluminium Works

← All sections of BMC USOR 2023 (Buildings)

Code	Description	Unit	Rate
R3-CS-AW-01	Providing and fixing in position two track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 61.85 mm x 45.5 mm x 1.3 mm thk (wt 1.055 kg/Rm) for bottom, 61.85 mm x 31.75 mm x 1.3 mm thk. (wt 0.659 kg/Rm) for top & sides, mounted on anodized aluminum rectangular frame of size 63mm x 38mm x 2.0mm(1.054). The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26,7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 9,190
R3-CS-AW-02	Providing and fixing in position three track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 92 mm x 45.5 mm x 1.5 mm thk (wt 1.659 kg/Rm) for bottom and 92 mm x 31.75 mm x 1.3 mm thk. (wt 0.933 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 100mm x 40mm x 1.3mm.(Wt 0.976 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7 mm x 1.10 mm thk. (Wt. 0.469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 9,112
R3-CS-AW-03	Providing and fixing in position four track aluminum window of extruded modular and anodized aluminum sections of approved make and of size 122.2 mm x 45.5 mm x 1.3 mm thk (wt 1.829 kg/Rm) for bottom and 122.2 mm x 31.75 mm x 1.2 mm thk. (wt 1.093 kg/Rm) for top and sides mounted on anodized aluminum rectangular frame of size 127mm x 25.4mm x 1.3mm(1.052 kg/m) The shutter comprising of bearing bottom and top of size 40mm x 18 mm x 1.25 mm thk (wt. 0.417 Kg/Rm) Interlocking section of size 40mm x 26.7 mm x 1.10 mm thk. (Wt. 0469 kg./Rm) and hand sides of 40mm x 18mm x 1.25 mm thk (wt. 0.417kg/Rm) with 5 mm thick plain / frosted / tinted glass fixed in shutter including approved quality neoprene gasket, fixtures, fastenings and accessories like PVC rollers, PVC weep holes, locks, handles etc. complete as directedby Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 9,174
R3-CS-AW-04	Providing and fixing in position aluminum louvered window with anodised aluminum frame of approved make and of size 40mm x 20mm x 2.0mm (wt. 0.605 kg/Rm) including adjustable aluminum frame, 4 to 6mm thk. frosted glass, fixtures and fastenings etc. complete as directed by by Engineer In Charge.	sqm	₹ 7,743
R3-CS-AW-05	Providing and fixing in position Top/side hung window of extruded modular and anodised aluminum sections of approved make and of size 38.10 mm x 25.40 mm x 1.44 mm thk (wt. 0.471 kg/Rm) for outer rectangular tube, 40 mm x 31.5 mm x 1.5 mm (wt. 0.549 kg/Rm) for outer frame, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.502 kg/Rm) for central mullion, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.549 kg/Rm) for shutter and 16.50 mm x 14.50 mm x 1.20 mm thk (wt. 0.157 kg/Rm) for glazing clip with 5 mm thick plain / frosted / tinted glass fixed in shutter including neoprene gasket, fixtures, fastenings and accessories like hinges, locking arrangement etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 9,794
R3-CS-AW-06	Providing and fixing in position side hung window with friction hinges, made up of extruded modular and anodised aluminum section of approved make and of size 38.10 mm x 25.40 mm x 1.44 mm thk (wt. 0.471 kg/Rm) for outer rectangular tube, 40 mm x 31.5 mm x 1.5 mm (wt. 0.549 kg/Rm) for outer frame, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.502 kg/Rm) for central mullion, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.549 kg/Rm) for shutter frame and 16.50 mm x 14.50 mm x 1.20 mm thk (wt. 0.157 kg/Rm) for glazing clip with 5 mm thick plain / frosted / tinted glass including neoprene gasket, fixtures, fastenings and accessories like handles, hinges, locking arrangement etc. complete as directedby Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 10,497
R3-CS-AW-07	Providing and fixing in position Centrally pivoted window made up of extruded and anodised aluminium sections of approved make and of size 38.10 mm x 25.40 mm x 1.44 mm thk (wt. 0.471 kg/Rm) for outer rectangular tube, 40 mm x 31.5 mm x 1.5 mm (wt. 0.549 kg/Rm) for Outer frame, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.502 kg/Rm) for central mullion, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.549 kg/Rm) for shutter frame, 16.50 mm x 14.50 mm x 1.20 mm thk (wt. 0.157 kg/Rm) for glazing clip with 5 mm thick palin / frosted / tinted glass including neoprene gasket, fixtures, fastenings and accessories like hinges, locking arrangement etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 9,158
R3-CS-AW-08	Providing and fixing in position fixed window made up of extruded and anodised aluminium sections of approved make and of size 50.80 mm x 25.40 mm x 2.41 mm thk (wt. 0.929kg./Rm) for outer rectangular tube, 40 mm x 31.5 mm x 1.5 mm (wt. 0.549 kg/Rm) for outer frame, 40 mm x 31.50 mm x 1.50 mm thk (wt. 0.502 kg/Rm) for central mullion, 16.50 mm x 14.50 mm x 1.20 mm thk (wt. 0.157 kg/Rm) for glazing clip with 5 mm thick including neoprene gasket, fixtures and fastenings etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 10,370
R3-CS-AW-09	Providing and fixing in position fully glazed aluminum door made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk , 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg./Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881 kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk (wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.88 mm thk (wt. 0.943 kg/Rm) for vertical of shutter (hinges side), 47.52 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) for vertical of shutter (latch side), clip weighing 0.097/kg/Rm., with 5 mm thick plain / frosted / tinted glass in shutter including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc., complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 8,474
R3-CS-AW-10	Providing and fixing in position alluminum door fully panelled with 6mm thick Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg./Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881 kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk (wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.88 mm thk (wt. 0.943 kg/Rm) for vertical shutter (hinge side), 47.52 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) for vertical shutter (latch side), clip weighing 0.097/kg/Rm., including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 8,189
R3-CS-AW-11	Providing and fixing in position alluminum door partly glazed and partly panelled with 6mm thick Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk , 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg./Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881 kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk (wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.88 mm thk (wt. 0.943 kg/Rm) for vertical shutter (hinge side), 47.52 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) for vertical shutter (latch side), clip weighing 0.097/kg/Rm., with 5 mm thick plain /frosted / tinted glass in shutters including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 8,361
R3-CS-AW-12	Providing and fixing in position fully glazed folding door made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk (wt. 1.054 kg/Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk(wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.8 mm thk (wt. 0.943kg/Rm) for shutter vertical hinges side, 47.62 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) shutter vertical latch side, clip weighing 0.097 kg/Rm with 5 mm thick plain / frosted / tinted glass including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 7,995
R3-CS-AW-13	Providing and fixing in position aluminum folding door fully panelled with 6mm thk. Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk (wt. 1.054 kg/Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk(wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.8 mm thk (wt. 0.943kg/Rm) for shutter vertical hinges side, 47.62 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) shutter vertical latch side, clip weighing 0.097 kg/Rm including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 7,652
R3-CS-AW-14	Providing and fixing in position aluminum folding door partly glazed and partly panelled with 6mm thick Novapan BSL and made up of extruded and anodised aluminium sections of approved make and of size 63.5 mm x 38.10 mm x 2.0 mm thk for outer rectangular tube, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881kg./Rm) for outer frame, 47.62 mm x 10.16 mm x 1.74 mm thk (wt. 0.881 kg/Rm) for top rail, 95.25 mm x 25.40 mm x 2.0 mm thk (wt. 1.519 kg/Rm) for bottom rail, 25.0 mm x 44.45 mm x 2.40 mm thk (wt. 0.918 kg/Rm) for lock rail, 47.62 mm x 44.45 mm x 1.88 mm thk (wt. 0.943 kg/Rm) for vertical shutter (hinge side), 47.52 mm x 44.45 mm x 1.95 mm thk (wt. 0.936 kg/Rm) for vertical shutter (latch side), clip weighing 0.097/kg/Rm., with 5 mm thick plain /frosted / tinted glass in shutters including neoprene gasket, fixtures, fastenings and accesories like hinges, locking arrangement, door closer etc. complete as directed by Engineer In Charge. (Note: anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodizing must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour)	sqm	₹ 7,823
R3-CS-AW-15	Providing and fixing anodized (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling de- anodized water for a period of one hour) aluminum fixed/ sliding / pivoted / top hung / side hung / louvered type windows, doors, ventilators and partitions conforming to IS:1948, 1961 with hollow bottom section & standard single / two / three / four track frame section all round (top, bottom and sides) with shutter frame made up of standard handle section standard interlocking section and standard top and bottom section with infill panel of plain / frosted / tinted glass/ Novapan sheet / acrylic sheet / hardner laminated sheet as listed below with nylon guides, gliders glass fixing PVC weather strips, neoprene gasket, PVC weep holes etc complete with approved type of locking arrangement, handles and other fixtures including fixing, filling the gaps with silicon sealant, cleaning polishing the aluminium section with petrol and / or other agents as specified by the manufacturers etc. complete as directed by Engineer In Charge.
R3-CS-AW-15-a	Aluminum section used	kg	₹ 1,170
R3-CS-AW-15-b	3.5 mm thick Plain / frosted / tinted Glass	sqm	₹ 1,811
R3-CS-AW-15-c	4 mm thick Plain / frosted / tinted Glass	sqm	₹ 1,921
R3-CS-AW-15-d	5 mm thick Plain / frosted / tinted Glass	sqm	₹ 2,105
R3-CS-AW-15-e	6 mm thick Plain / frosted / tinted Glass	sqm	₹ 2,215
R3-CS-AW-15-f	8 mm thick plain / frosted / tinted glass	sqm	₹ 2,510
R3-CS-AW-15-g	9 mm thick Novapan sheet conforming to IS:2835-1991	sqm	₹ 2,689
R3-CS-AW-15-h	12 mm thick Novapan sheet conforming to IS:2835-1991	sqm	₹ 3,037
R3-CS-AW-15-i	4 mm thick Hardener Laminated sheet (Bakelite composite panel)	sqm	₹ 1,822
R3-CS-AW-15-j	15 mm thick Hollow PVC sheet Panel (Sintex or Equivalent)	sqm	₹ 1,778
R3-CS-AW-15-k	6 mm. thick Acrylic sheet	sqm	₹ 2,410
R3-CS-AW-16	Providing and fixing SS Mosquito mesh in anodised (anodic film must not be less than 15 microns i.e. AC-15 as per IS, the anodising must be scaleted by keeping the anodized section in boiling de-anodized water for a period of one hour) aluminium shutter fixed in sliding / openable / fixed windows conforming to IS:1948-1961 as per drawing and directed by Engineer In Charge. (Note: For Aluminum Sections, total weight shall be upto 3.5 kg/sq.m.)	sqm	₹ 1,587
R3-CS-AW-18	Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi- metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as Note : The following performance test are to be conducted on ACP system if area of ACP system exceeds 4500 Sqm from the certified laboratories accreditated by NABL (National Accreditation Board for Testing and Calibration Laboratories), Department of Science & Technologies, India. The NIT approving authority will decide the necessity of testing on the basis of cost of the work, cost of the test and importance of the work. 1. Performance Laboratory Test for Air Leakage Test (-50pa to - 300pa) & (+50pa to +300pa) as per ASTM E-283-04 testing method for a range of testing limit 1 to 200 mVhr“ 2. 2. Static Water Penetration Test. (50pato 1500pa) as per ASTME-331-09 testing method for a range upto 2000 ml.“ 3. Dynamic Water Penetration (50pato 1500pa) as per AAMA 501.01-05 testing method for a range upto 2000 ml“ 4. Structural Performance Deflection and deformation by static air pressure test ( 1.5 times design wind pressure without any failure) as per ASTME-330-10 testing method for a range upto failure) as per ASTME-330-10 testing method for a range upto 50 mm“ 5. Seismic Movement Test (Upto 30 mm) as per AAMA 501.4- 09 testing method for Qualitative test. 6. Onsite Test for Water Leakage for a pressure range 50 kpa to 240 kpa (35 psi) upto 2000 ml"	sqm	₹ 3,891
R3-CS-AW-19	Tests to be conducted on site Providing and fixing 12mm thk toughened etched glass as per the design, as per the design. Glass to be fixed at top & bottom in heavy guage aluminium 'c ' channel concealed in floor & boxing. Cost to be inclusive of silicon sealant to the periphery of the glass as directed.	sqm	₹ 1,689
R3-CS-AW-20	Tests to be conducted on site Design, supply, fabrication & erection of approved structural glazing using specially designed Vertical Mullion & HorizontalTransoms ofRequired size & as per architect's approved Grid work with aluminium rectangular sections to be fixed in masonary at interval of eachfloor on concrete slab with 80 mm x 100 mm x 5mm thick galvanized M & Langle fixed on wall side with raw bolt size of 10 mm x 90 mm with necessary bolts & washers / nuts for the plumb the linelevels. the glass panel's shall be fixed on a specially designed architectural sub- frame using Dow Corning 995 strural sealant & GE Silicon (SSG - 4000) sub frame would be fixed on main frame grid in amanner that no aluminium frame is visible from outside & groovesbetween the glass panel shall be filled with weather sealant of Dow corning 789 / GE Sil proof to made it air tight, water proof & dustfree thus giving it a flush look outside. Glass will be of 6 mm thickGlaverbel reflective type with heat strenghthened toughened	sqm	₹ 4,168
R3-CS-AW-21	Tests to be conducted on site Design,Fabrication & Installation of 4 mm thick exterior grade PVDF coated aluminium composite panels of ALUCOBOND having 0.5 mm thick aluminium PVDF coated sheet available in standard colours + 3 mm core material + 0.5 mm aluminium sheet chemically treated ( back sheet ) bent as per requirement, fitted on anodised aluminium necessary coated rectangular grid work, hardware, fixtures,brackets, anchor, fasteners of S.S. 304 grade etc. complete duly sealed with weathering silicon manufactured by DOW corning / G.E. silicon for circular columns and curved beams etc complete. All section for supporting ACP shall be of size 50 x 50 x 2.5 mm at a distance of 1.2 m Horizontally & Vertically or as per requirement of the design shop drawing has to be submitted by the contractor for the approval of structural Engineer. a) For Terrace b) For Entrance Canopy REBATE FOR SIZES Size :39"-Bruhan mumbai Mahanagarpalika shri Harilal bhagwati sarvsadharan Rugnalay (For 11" = 505.94*11"/25" = Rs. 222.17 per Inch. Size :46"-MCGM SHRI HARILAL BHAGWATI GENERAL HOSPITAL (For 4" = 505.94*4"/25" = Rs. 80.95 per Inch	sqm	₹ 3,999

Source: Unified Schedule of Rates 2023 (Buildings), Municipal Corporation of Greater Mumbai. Rates are shown as published; check the official book and its correction slips before you submit an estimate. BESTimate is not issued by or affiliated with this department.

Made free with BESTimate by F K Consultant · estimate.fkconsultant.com/calculators · approximate figures — check against your drawings and local rates.